|
 |
English
version
For å registrere i Cristin må du være vitenskapelig eller administrativt ansatt.
|
|
|
|
|
 |
|
|
|
Viser treff 1-50 av 56
|
<< Forrige
1
2
Neste >>
|
2021
|
1. |
Grytten, Frode; Sørensen, Bent Fruergaard; Goutianos, Stergios; Joki, Reidar Kvale; Jørgensen, Jens Kjær. A micromechanical model of fiber bridging including effects of large deflections of the bridging fibers. Composite structures 2021 ;Volum 258. s. - NTNU SINTEF
Untitled
|
2020
|
2. |
Joki, Reidar Kvale; Grytten, Frode; Hayman, Brian; Sørensen, Bent Fruergaard. A mixed mode cohesive model for FRP laminates incorporating large scale bridging behaviour. Engineering Fracture Mechanics 2020 ;Volum 239. s. 1-15 SINTEF UiO
Untitled
|
2019
|
3. |
Grytten, Frode; Sørensen, Bent; Goutianos, Stergios; Joki, Reidar Kvale; Jørgensen, Jens Kjær. Micromechanical Investigations Of Cross-Over Fiber Bridging. Composites 2019; 2019-09-18 - 2019-09-20 SINTEF
Untitled
|
|
4. |
Grytten, Frode; Sørensen, Bent; Goutianos, Stergios; Joki, Reidar Kvale; Jørgensen, Jens Kjær. Micromechanical Model of Cross-Over Fiber Bridging. CompTest 2019; 2019-05-27 - 2019-05-29 SINTEF
Untitled
|
|
5. |
Johnsen, Joakim; Clausen, Arild Holm; Grytten, Frode; Benallal, Ahmed; Hopperstad, Odd Sture. A thermo-elasto-viscoplastic constitutive model for polymers. Journal of the Mechanics and Physics of Solids 2019 ;Volum 124. s. 681-701 NTNU SINTEF
Untitled
|
|
6. |
Reia da Costa, Elisabete; Kubowicz, Stephan; Gaarder, Rune Harald; Grytten, Frode; Bakke, Inge. Effect of peel ply surface treatment on adhesive bonding of polyester and vinyl ester composites used in the maritime industry. AB2019; 2019-07-11 - 2019-07-12 SINTEF
Untitled
|
2018
|
7. |
Alcock, Benjamin; Olafsen, Kjell; Huse, Jon; Grytten, Frode. The low temperature crystallization of hydrogenated nitrile butadiene rubber (HNBR). Polymer testing 2018 ;Volum 66. s. 228-234 SINTEF
Untitled
|
|
8. |
Hovig, Even Wilberg; S. Azar, Amin; Grytten, Frode; Sørby, Knut; Andreassen, Erik. Determination of Anisotropic Mechanical Properties for Materials Processed by Laser Powder Bed Fusion. Advances in Materials Science and Engineering 2018 ;Volum 2018. s. - NTNU SINTEF
Untitled
|
|
9. |
Johnsen, Joakim; Clausen, Arild Holm; Grytten, Frode; Benallal, Ahmed; Hopperstad, Odd Sture. Influence of strain rate and temperature on the mechanical behaviour of cross-linked low density polyethylene. DYFP2018, The 17th International Conference on Deformation, Yield and Fracture of Polymers; 2018-03-26 - 2018-03-29 NTNU SINTEF
Untitled
|
|
10. |
Johnsen, Joakim; Clausen, Arild Holm; Grytten, Frode; Benallal, Ahmed; Hopperstad, Odd Sture. Modelling of the thermo-mechanical behaviour of cross-linked low density polyethylene. 31st Nordic Seminar on Computational Mechanics (NSCM-31); 2018-10-25 - 2018-10-26 NTNU SINTEF
Untitled
|
|
11. |
Ren, Xiaobo; Akselsen, Odd Magne; Nyhus, Bård; Grytten, Frode; Kane, Pascal-Alexandre. Glimpse from 10 Years of Arctic Materials R&D. Seminar - Materials for Cold Climate and Arctic Applications; 2018-05-31 - 2018-05-31 SINTEF
Untitled
|
2017
|
12. |
Johnsen, Joakim. Thermomechanical behaviour of semi-crystalline polymers: experiments, modelling and simulation. Norges teknisk-naturvitenskapelige universitet 2017 (ISBN 978-82-326-2702-8) 157 s. NTNU SINTEF
Untitled
|
|
13. |
Johnsen, Joakim; Grytten, Frode; Hopperstad, Odd Sture; Clausen, Arild Holm. Influence of strain rate and temperature on the mechanical behaviour of rubber-modified polypropylene and cross-linked polyethylene. Mechanics of materials (Print) 2017 ;Volum 114. s. 40-56 NTNU SINTEF
Untitled
|
|
14. |
Johnsen, Joakim; Grytten, Frode; Hopperstad, Odd Sture; Clausen, Arild Holm. Numerical simulation of cross-linked polyethylene at different ambient temperatures and strain rates. Mek'IT 17 - 9th National Conference on Computational Mechanics; 2017-05-11 - 2017-05-12 NTNU SINTEF
Untitled
|
2016
|
15. |
Grytten, Frode; Mourad, Alaa. Sterkt ræl. Klatring [Tidsskrift] 2016-02-01 SINTEF
Untitled
|
|
16. |
Johnsen, Joakim; Grytten, Frode; Hopperstad, Odd Sture; Clausen, Arild Holm. Experimental set-up for determination of the large-strain tensile behaviour of polymers at low temperatures. Polymer testing 2016 ;Volum 53. s. 305-313 NTNU SINTEF
Untitled
|
|
17. |
Johnsen, Joakim; Grytten, Frode; Hopperstad, Odd Sture; Clausen, Arild Holm. Large strain tensile behaviour of rubber-modified polypropylene at low temperatures. European Mechanics of Materials Conference 15; 2016-09-07 - 2016-09-09 NTNU SINTEF
Untitled
|
|
18. |
Joki, Reidar Kvale; Grytten, Frode; Hayman, Brian; Sørensen, Bent. Determination of a cohesive law for delamination modelling – Accounting for variation in crack opening and stress state across the test specimen width. Composites Science And Technology 2016 ;Volum 128. s. 49-57 SINTEF UiO
Untitled
|
2015
|
19. |
Kane, Alexandre; Osen, Vidar; Ren, Xiaobo; Nordhagen, Håkon Ottar; Grytten, Frode; Akselsen, Odd Magne; Zoric, Josip. A data management system for material assessment at low temperature. ISOPE - International Offshore and Polar Engineering Conference. Proceedings 2015 ;Volum 2015-January. s. 289-292 SINTEF
Untitled
|
|
20. |
Gaarder, Rune Harald; Grytten, Frode. The role of low temperature impact damage and freeze-thaw exposure on post impact compression strength of glass fibre reinforced polymer-matrix composite materials. ISOPE - International Offshore and Polar Engineering Conference. Proceedings 2015 ;Volum 2015-January. s. 293-300 SINTEF
Untitled
|
|
21. |
Grytten, Frode; Hayman, Brian; Sørensen, Bent. DETERMINATION OF MIXED MODE COHESIVE LAW FOR DELAMINATION WITH LARGE SCALE BRIDGING. 7th International Conference on Composite Testing and Model Identification; 2015-04-08 - 2015-04-10 SINTEF UiO
Untitled
|
|
22. |
Joki, Reidar Kvale; Grytten, Frode; Hayman, Brian. Nonlinear response in glass fibre non-crimp fabric reinforced vinylester composites. Composites Part B: Engineering 2015 ;Volum 77. s. 105-111 SINTEF UiO
Untitled
|
|
23. |
Perillo, Giovanni; Grytten, Frode; Sørbø, Steinar; Delhaye, Virgile Roger. Numerical/experimental impact events on filament wound composite pressure vessel. Composites Part B: Engineering 2015 ;Volum 69. s. 406-417 SINTEF SRAUFOSS
Untitled
|
2014
|
24. |
Grytten, Frode; Delhaye, Virgile Roger; Olafsen, Kjell; Sjchelderup, T.. Numerical modeling of low temperature reeling of pipes. I: Proceedings of the Twenty-fourth (2014) International Offshore and Polar Engineering Conference, Busan, Korea. : International Society of Offshore and Polar Engineers (ISOPE) 2014 ISBN 978-1-880653-91-3. s. 261-270 NTNU SINTEF
Untitled
|
|
25. |
Perillo, Giovanni; Vacher, Robin; Grytten, Frode; Sørbø, Steinar; Delhaye, Virgile Roger. Material characterisation and failure envelope evaluation of filament wound GFRP and CFRP composite tubes. Polymer testing 2014 ;Volum 40. s. 54-62 SINTEF SRAUFOSS
Untitled
|
2013
|
26. |
Hegdal, Jan Peder; Tofteberg, Terje; Schjelderup, Trond; Hinrichsen, Einar L; Grytten, Frode; Echtermeyer, Andreas. Thermal conductivity of anisotropic, inhomogeneous high-density foam calculated from three-dimensional reconstruction of microtome images. Journal of Applied Polymer Science 2013 ;Volum 130.(2) s. 1020-1028 NTNU SINTEF
Untitled
|
2012
|
27. |
Daiyan, Hamid; Andreassen, Erik; Grytten, Frode; Osnes, Harald; Gaarder, Rune Harald. Shear Testing of Polypropylene Materials Analysed by Digital Image Correlation and Numerical Simulations. Experimental mechanics 2012 ;Volum 52.(9) s. 1355-1369 USN SINTEF-NAR SINTEF UiO
Untitled
|
|
28. |
Daiyan, Hamid; Grytten, Frode; Andreassen, Erik; Osnes, Harald; Lyngstad, Ole Vidar. Numerical simulation of low-velocity impact loading of a ductile polymer material. Materials & Design 2012 ;Volum 42. s. 450-458 SINTEF UiO
Untitled
|
|
29. |
Joki, Reidar Kvale; Grytten, Frode; Osnes, Harald. Coupling of plasticity and damage in glass fibre reinforced polymer composites. 10th International conference on the mechanical and physical behaviour of materials under dynamic loading; 2012-09-02 - 2012-09-07 SINTEF UiO
Untitled
|
|
30. |
Joki, Reidar Kvale; Grytten, Frode; Osnes, Harald. PROGRESSIVE FAILURE IN GLASS FIBRE REINFORCED POLYMER COMPOSITES. European Conferance on Composite Materials; 2012-06-24 - 2012-06-28 FFI NTNU SINTEF
Untitled
|
|
31. |
Polanco-Loria, Mario A.; Daiyan, Hamid; Grytten, Frode. Material parameters identification: An inverse modeling methodology applicable for thermoplastic materials. Polymer Engineering and Science 2012 ;Volum 52.(2) s. 438-448 SINTEF
Untitled
|
2011
|
32. |
Andreassen, Erik; Daiyan, Hamid; Grytten, Frode; Lyngstad, Ole Vidar; Osnes, Harald. Material modelling for simulating impact loading of injection-moulded polypropylene parts. EUROTEC 2011; 2011-11-14 - 2011-11-15 SINTEF UiO
Untitled
|
|
33. |
Daiyan, Hamid; Grytten, Frode; Andreassen, Erik; Gaarder, Rune Harald; Osnes, Harald. Mechanical testing of polypropylene materials in shear analysed by digital image correlation. EUROTEC 2011; 2011-11-14 - 2011-11-15 SINTEF UiO
Untitled
|
|
34. |
Haslerud, Marit; Gaarder, Rune Harald; Grytten, Frode; Osnes, Harald. Testing and analysis of adhesively bonded single lap joints at sub-zero temperatures - a master thesis. I: Proceedings of the 24th Nordic Seminar on Computational Mechanics. Helsinki, Finland: Alto University publication series 2011 ISBN 978-952-60-4347-0. s. - SINTEF UiO
Untitled
|
|
35. |
Joki, Reidar Kvale; Grytten, Frode; Osnes, Harald. Progressive failure analysis of fiber reinforced polymer composites. Sixth National Conference on Computational Mechanics; 2011-05-23 - 2011-05-24 SINTEF UiO
Untitled
|
|
36. |
Grytten, Frode; Blochowiak, Mariusz; Hinrichsen, Einar L; Tofteberg, Terje. USE OF DIGITAL IMAGE CORRELATION AND INVERSE MODELING TO DETERMINE RESIDUAL STRESS IN AXISYMMETRIC POLYMER COMPONENTS. SPE Eurotec; 2011-11-13 - 2011-11-15 SINTEF
Untitled
|
|
37. |
Joki, Reidar Kvale; Grytten, Frode; Osnes, Harald. Progressive failure analysis of fiber reinforced polymer composites. I: MekIT'11: Sixth National Conference on Computational Mechanics, Trondheim 23-24 May 2011. Tapir Akademisk Forlag 2011 ISBN 978-82-519-2798-7. s. 147-156 SINTEF UiO
Untitled
|
|
38. |
Polanco-Loria, Mario A.; Grytten, Frode; Berstad, Torodd; Sørbø, Steinar; Hinrichsen, Einar L. Numerical simulations of UD-FRC plates: A pin-hole loaded case and ballistic limit predictions. 3th International Conference on Impact Loading of Lightweight Structures; 2011-06-28 - 2011-07-01 NTNU SINTEF
Untitled
|
2010
|
39. |
Daiyan, Hamid; Andreassen, Erik; Grytten, Frode; Lyngstad, Ole Vidar; Luksepp, T; Osnes, Harald. Low-velocity impact response of injection-moulded polypropylene plates - Part 1: Effects of plate thickness, impact velocity and temperature. Polymer testing 2010 ;Volum 29.(6) s. 648-657 SINTEF UiO
Untitled
|
|
40. |
Daiyan, Hamid; Andreassen, E; Grytten, Frode; Lyngstad, Ole Vidar; Luksepp, T; Osnes, Harald. Low-velocity impact response of injection-moulded polypropylene plates - Part 2: Effects of moulding conditions, striker geometry, clamping, surface texture, weld line and paint. Polymer testing 2010 ;Volum 29.(7) s. 894-901 SINTEF UiO
Untitled
|
|
41. |
Fagerholt, Egil; Grytten, Frode; Gihleengen, Britt Elin; Langseth, Magnus; Børvik, Tore. Continuous out-of-plane deformation measurements of AA5083-H116 plates subjected to low-velocity impact loading. International Journal of Mechanical Sciences 2010 ;Volum 52.(5) s. 689-705 NTNU SINTEF
Untitled
|
|
42. |
Grytten, Frode; Polanco-Loria, Mario A.. Modelling of fibre reinforced polymer composites subject to impact loading – State of the art. : SINTEF rapport 2010 (ISBN 9788214050110) 57 s. SINTEF Rapport SINTEF
Untitled
|
|
43. |
Tofteberg, Terje; Amedro, Helene; Grytten, Frode; Andreassen, Erik. Effects of Injection Molding Holding Pressure on the Replication of Surface Microfeatures. International polymer processing 2010 ;Volum 25.(3) s. 236-241 SINTEF
Untitled
|
2009
|
44. |
Daiyan, Hamid; Grytten, Frode; Andreassen, Erik; Lyngstad, Ole Vidar; Osnes, Harald; Gaarder, Rune; Hinrichsen, Einar. Numerical simulation of low-velocity impact loading of polymeric materials. The 7th European LS-DYNA Conference; 2009-05-14 - 2009-05-15 SINTEF UiO
Untitled
|
|
45. |
Daiyan, Hamid; Grytten, Frode; Hinrichsen, Einar L; Andreassen, Erik. Some effects of processing on the mechanical response of polyolefins. International workshop on behaviour and modelling of polymers; 2009-06-10 - 2009-06-11 SINTEF
Untitled
|
|
46. |
Daiyan, Hamid; Grytten, Frode; Hinrichsen, Einar L; Andreassen, Erik. Three-dimensional digital image correlation in constitutive property measurement and model verification. LIMESS User Meeting; 2009-10-07 - 2009-10-08 SINTEF
Untitled
|
|
47. |
Grytten, Frode; Børvik, Tore; Hopperstad, Odd Sture; Langseth, Magnus. Low velocity perforation of AA5083-H116 aluminium plates. International Journal of Impact Engineering 2009 ;Volum 36.(4) s. 597-610 NTNU
Untitled
|
|
48. |
Grytten, Frode; Børvik, Tore; Hopperstad, Odd Sture; Langseth, Magnus. Quasi-static perforation of thin aluminium plates. International Journal of Impact Engineering 2009 ;Volum 36.(3) s. 486-497 NTNU
Untitled
|
|
49. |
Grytten, Frode; Daiyan, Hamid; Polanco-Loria, Mario A.; Dumoulin, Stephane. Use of digital image correlation to measure large-strain tensile properties of ductile thermoplastics. Polymer testing 2009 ;Volum 28.(6) s. 653-660 SINTEF
Untitled
|
2008
|
50. |
Grytten, Frode; Holmedal, Bjørn; Hopperstad, Odd Sture; Børvik, Tore. Evaluation of identification methods for YLD2004-18p. International journal of plasticity 2008 ;Volum 24.(12) s. 2248-2277 NTNU
Untitled
|
Vis neste liste
|