Current Research Information SysTem In Norway
 
 

 English version


 
Hovedside
Forskningsresultater/NVI
Forskere
Prosjekter
Forskningsenheter
Logg inn
Om Cristin
 
 
   
Eksporter til


Viser treff 1-50 av 54 << Forrige 1 2    Neste >>

2020
1 Chelishchev, Petr; Sørby, Knut.
Simulation Algorithm of Sample Strategy for CMM Based on Neural Network Approach. I: Advanced Manufacturing and Automation IX Conference proceedings IWAMA 2019. Springer 2020 ISBN 978-981-15-2341-0. s. 434-441
NTNU Untitled
 
2019
2 Chelishchev, Petr; Sørby, Knut.
Optimization of Sample Size for Two-Point Diameter Verification in Coordinate Measurements. Lecture Notes in Electrical Engineering 2019 ;Volum 484.(1) s. 313-321
NTNU Untitled
 
3 Chelishchev, Petr; Sørby, Knut; Privalov, Vadim.
Perspectives for appliance and accuracy improvement of coordinate measurements with laser technique. 2019 IEEE International Conference on Electrical Engineering and Photonics; 2019-10-17 - 2019-10-18
NTNU Untitled
 
4 Hagen, Catalina Hoem Musinoi; Hognestad, Asbjørn; Knudsen, Ole Øystein; Sørby, Knut.
The effect of surface roughness on corrosion resistance of machined and epoxy coated steel. Progress in organic coatings 2019 ;Volum 130.(5) s. 17-23
NTNU SINTEF Untitled
 
5 Hovig, Even Wilberg; Holm, Håkon Dehli; Sørby, Knut.
Effect of Processing Parameters on the Relative Density of AlSi10Mg Processed by Laser Powder Bed Fusion. I: Advanced Manufacturing and Automation VIII Proceedings IWAMA 2018. Springer 2019 ISBN 978-981-13-2375-1. s. 268-276
NTNU Untitled
 
6 Hovig, Even Wilberg; S. Azar, Amin; Sunding, Martin Fleissner; Andreassen, Erik; Sørby, Knut.
High cycle fatigue life estimation of materials processed by laser powder bed fusion. Fatigue & Fracture of Engineering Materials & Structures 2019 ;Volum 42.(7) s. 1454-1466
NTNU SINTEF Untitled
 
2018
7 Chelishchev, Petr; Popov, Aleksandr; Sørby, Knut.
An investigation of outlier detection procedures for CMM measurement data. MATEC Web of Conferences 2018 ;Volum 220. s. 1-6
NTNU Untitled
 
8 Chelishchev, Petr; Popov, Aleksandr; Sørby, Knut.
Robust estimation of optimal sample size for CMM measurements with statistical tolerance limits. MATEC Web of Conferences 2018 ;Volum 220. s. 1-5
NTNU Untitled
 
9 Hovig, Even Wilberg; S. Azar, Amin; Grytten, Frode; Sørby, Knut; Andreassen, Erik.
Determination of Anisotropic Mechanical Properties for Materials Processed by Laser Powder Bed Fusion. Advances in Materials Science and Engineering 2018 ;Volum 2018. s. -
NTNU SINTEF Untitled
 
10 Hovig, Even Wilberg; S. Azar, Amin; Sunding, Martin Fleissner; Sørby, Knut; Andreassen, Erik.
Anisotropic fatigue properties of IN718 produced by powder bed fusion. TMS 2018 147th annual meeting & exhibition; 2018-03-11 - 2018-03-15
NTNU SINTEF Untitled
 
11 Hovig, Even Wilberg; S. Azar, Amin; Sunding, Martin Fleissner; Sørby, Knut; M'hamdi, Mohammed; Andreassen, Erik.
High cycle fatigue life estimation of AlSi10Mg processed by laser powder bed fusion. MATEC Web of Conferences 2018 ;Volum 188. s. -
NTNU SINTEF Untitled
 
12 Hovig, Even Wilberg; Sørby, Knut; Drønen, Per Erik.
Metal Penetration in Additively Manufactured Venting Slots for Low-Pressure Die Casting. Lecture Notes in Electrical Engineering 2018 ;Volum 451. s. 457-468
NTNU Untitled
 
13 Sørby, Knut; Vagnorius, Zydrunas.
High-Pressure Cooling in Turning of Inconel 625 with Ceramic Cutting Tools. Procedia CIRP 2018 ;Volum 77. s. 74-77
NTNU Untitled
 
14 Sørby, Knut; Østling, Dan.
Precision turning with instrumented vibration-damped boring bars. Procedia CIRP 2018 ;Volum 77. s. 666-669
NTNU Untitled
 
15 Tomac, Nikola; Sørby, Knut; Doboviček, Sandro.
Formation of Built-Up Layer on the Tool in Turning Operation of Magnesium Alloys. Tehnicki Vjesnik 2018 ;Volum 25.(3) s. 940-943
NTNU Untitled
 
2017
16 Fergani, Omar; Tronvoll, Sigmund Arntsønn; Brøtan, Vegard; Welo, Torgeir; Sørby, Knut.
Additive-Manufactured Sandwich Lattice Structures: A Numerical and Experimental Investigation. ESAFORM 2017 - The International ESAFORM Conference on Material Forming; 2017-04-26 - 2017-04-28
NTNU Untitled
 
2016
17 Brøtan, Vegard; Fahlström, Johan; Sørby, Knut.
Industrialization of Metal Powder Bed Fusion through Machine Shop Networking. Procedia CIRP 2016 ;Volum 54. s. 181-185
NTNU SRAUFOSS Untitled
 
18 Brøtan, Vegard; Fergani, Omar; Sørby, Knut; Welo, Torgeir.
MECHANICAL PROPERTIES OF BIOCOMPATIBLE 316L STEEL RHOMBIC DODECAHEDRON LATTICE STRUCTURES. International Solid Freeform Fabrication Symposium; 2016-08-07 - 2016-08-10
NTNU Untitled
 
19 Brøtan, Vegard; Åsebø Berg, Olav; Sørby, Knut.
Additive Manufacturing for Enhanced Performance of Molds. Procedia CIRP 2016 ;Volum 54. s. 186-190
NTNU SRAUFOSS Untitled
 
20 Fergani, Omar; Atmani, Zoubir; Zenasni, Mohamed; Sørby, Knut.
Physics-based Model to Predict Forces and Chip Morphology in the Machining of a Ti-6Al-4V Alloys for Aeronautical Applications. Procedia Manufacturing 2016 ;Volum 6. s. 53-62
NTNU Untitled
 
21 Hovig, Even Wilberg; Brøtan, Vegard; Sørby, Knut.
Additive Manufacturing for Enhanced Cooling in Moulds for Casting. I: Advanced Manufacturing and Automation VI. Atlantis Press 2016 ISBN 978-94-6252-243-5. s. -
NTNU Untitled
 
22 P. Chelishchev, ; S. Kolyubin, ; K. Sørby, .
Inspection of size and geometrical tolerances of 3D objects by contact, optical and laser systems. Laser information technologies to medicine, biology, environmental and transport - 2016; 2016-09-12 - 2016-09-16
NTNU Untitled
 
23 Sharma, Vishal S; Singh, GurRaj; Sørby, Knut; Gupta, Munish Kumar.
Parametric Optimization Using The Particle Swarm Optimization (PSO) Technique for Minimizing Tool Wear While Milling Inconel 718 Alloy Assisted by Minimum Quantity Lubrication (MQL). I: Advanced Manufacturing and Automation VI. Atlantis Press 2016 ISBN 978-94-6252-243-5. s. 202-208
NTNU Untitled
 
24 Sørby, Knut.
Development and Optimization of Vibration-Damped Tool Holders for High Length-to-Diameter Boring Operations. High Speed Machining 2016 ;Volum 2. s. 51-58
NTNU Untitled
 
2015
25 Sharma, Vishal S; Singh, GurRaj; Sørby, Knut.
A review on minimum quantity lubrication for machining processes. Materials and Manufacturing Processes 2015 ;Volum 30.(8) s. 935-953
NTNU Untitled
 
26 Sørby, Knut; Sundseth, Einar.
High-accuracy turning with slender boring bars. Advances in Manufacturing 2015 ;Volum 3.(2) s. 105-110
NTNU Untitled
 
2014
27 Sørby, Knut.
Precision Turning with Slender Boring Bars. I: Advanced Manufacturing and Automation, 4th International Workshop of Advanced Manufactruing and Automation, (IWAMA2014). Switzerland: Trans Tech Publicatons 2014 ISBN 978-3-03835-253-2. s. 112-116
NTNU Untitled
 
2013
28 Echtermeyer, Andreas; Emdal, Arnfinn; Grønli, Morten; Hakvåg, Jan Terje; Jacobsen, Terje; Nordal, Steinar; Sangesland, Sigbjørn; Simonsen, Anne Karoline; Steen, Sverre; Sørby, Knut.
Rapport fra Laboratorieutvalget 2012/2013. Fakultet for ingeniørvitenskap og teknologi. Trondheim: NTNU 2013 72 s.
NTNU SINTEF Untitled
 
29 Sørby, Knut.
Double tuned mass damper for long boring bars. I: Proceedings of the 3rd International Conference on Production and Industrial Engineering, CPIE 2013. Jalandhar, India: National Institute of Technology 2013 ISBN 978-81-920453-1-3. s. -
NTNU Untitled
 
30 Sørby, Knut.
High-Accuracy Turning with Long Boring Bars. I: ISOM 2013 Proceedings (GIAP Journals, India): Proceedings of the International Conference on Sustainable Manufacturing & Operations Management. Thane, India: Gyandhara International Academic Publications 2013 ISBN 9788192578125. s. 41-44
NTNU Untitled
 
2011
31 Boivie, Klas Magnus; Sørby, Knut; Brøtan, Vegard; Ystgaard, Pål.
Development of a Hybrid Manufacturing Cell; Integration of Additive Manufacturing with CNC Machining. 21th Solid freeform fabrication symposium; 2011-08-06 - 2011-08-08
NTNU SRAUFOSS Untitled
 
32 Vagnorius, Zydrunas; Sørby, Knut.
Effect of high pressure cooling on life of SiAlON tools in machining of Inconel 718. The International Journal of Advanced Manufacturing Technology 2011 ;Volum 54.(1) s. 83-92
NTNU Untitled
 
2010
33 Sørby, Knut; Vagnorius, Zydrunas; Tønnessen, Kjell.
Surface integrity in finish turning of nickel-base alloys with CBN tools. I: Proceedings of the 5th International Conference on Advances in Production Engineering (APE'2010). Warsaw University of Technology 2010 ISBN 978-83-7204-903-2. s. 376-381
NTNU Untitled
 
34 Vagnorius, Zydrunas; Rausand, Marvin; Sørby, Knut.
Determining optimal replacement time for metal cutting tools. European Journal of Operational Research 2010 ;Volum 206.(2) s. 407-416
NTNU Untitled
 
35 Vagnorius, Zydrunas; Sørby, Knut.
Effect of High Pressure Cooling on Life of SiAlON-based Ceramic Cutting Tools. I: Proceedings of the 5th International Conference on Advances in Production Engineering (APE'2010). Warsaw University of Technology 2010 ISBN 978-83-7204-903-2. s. 352-362
NTNU Untitled
 
2009
36 Vagnorius, Zydrunas; Sørby, Knut.
Estimation of Cutting Tool Failure Costs. IEEE International Conference on Industrial Engineering and Engineering Management 2009 s. 262-266
NTNU Untitled
 
37 Vagnorius, Zydrunas; Sørby, Knut; Rausand, Marvin.
Probabilistic Model for Determination of Tool Replacement Time. I: Proceedings of the 12th CIRP Conference on Modelling of Machining Operations, Volume II. Arrasate-Mondragon, Spain: MU. Mondragon Unibertsitateko Zerbitzu Editoriala 2009 ISBN 978-84-608-0866-4. s. 757-764
NTNU Untitled
 
2008
38 Ringen, Geir; Sørby, Knut; Martinsen, Kristian.
High-pressure coolant chip control in boring of aluminium alloys. I: Proceedings of the Eight International Conference on Advanced Manufacturing Systems and Technology. Udine, Italia: CISM, International Centre for Mechanical Sciences 2008 ISBN 88-85137-22-9. s. 181-189
NTNU Untitled
 
39 Sørby, Knut; Tønnessen, Kjell.
Machinability of AerMet 100 in turning operations. I: Proceedings of the Eight International Conference on Advanced Manufacturing Systems and Technology. Udine, Italia: CISM, International Centre for Mechanical Sciences 2008 ISBN 88-85137-22-9. s. 93-104
NTNU SINTEF Untitled
 
40 Vagnorius, Zydrunas; Sørby, Knut.
Reliability of Machine Tool Systems in Aircraft Industry. I: Proceedings of the Eight International Conference on Advanced Manufacturing Systems and Technology. Udine, Italia: CISM, International Centre for Mechanical Sciences 2008 ISBN 88-85137-22-9.
NTNU Untitled
 
2007
41 Sørby, Knut.
Inverse kinematics of five-axis machines near singular configurations. International journal of machine tools & manufacture 2007 ;Volum 47.(2) s. 299-306
NTNU Untitled
 
42 Sørby, Knut; Tønnessen, Kjell; Torjusen, Jan Erik; Andersen, Leif.
The effect of high-pressure coolant on surface integrity in turning Ti6Al4V. The Sixth International Conference on High Speed Machining; 2007-03-21 - 2007-03-22
NTNU SINTEF Untitled
 
2006
43 Sørby, Knut; Bjørnstad, Magnus Smedsrud; Tønnessen, Kjell.
The effect of high-pressure cutting fluid on chip breaking and tool life in turning of nickel-base alloys. CIRP - 2nd International Conference on High Performance Cutting; 2006-06-12 - 2006-06-13
NTNU SINTEF Untitled
 
44 Sørby, Knut; Tønnessen, Kjell.
High-pressure cooling of face-grooving operations in Ti6Al4V. Proceedings of the Institution of mechanical engineers. Part B, journal of engineering manufacture 2006 ;Volum 220.(10) s. 1621-1627
NTNU SINTEF Untitled
 
2005
45 Sørby, Knut.
Økonomi ved sponskjærende bearbeiding. Temadag: Bearbeidingsøkonomi – verktøy og skjærevæsker; 2005-03-10 - 2005-03-10
NTNU Untitled
 
46 Sørby, Knut; Tønnessen, Kjell.
Improving productivity in interrupted finish turning of Ti6Al4V. I: Proceedings of the seventh international conference on advanced manufacturing systems and technology - AMST'05. Springer Publishing Company 2005 ISBN 3-211-26537-6. s. 117-124
NTNU Untitled
 
2004
47 Dransfeld, Sebastian; Sørby, Knut; Johansen, Vidar.
Tool condition monitoring in side milling of nickel-based super alloy. The 7th International Conference on Monitoring and Automatic Supervision in Manufacturing; 2004-09-19 - 2004-09-21
NTNU Untitled
 
48 Sørby, Knut.
Minimizing vibration tendencies in machining. : Sandvik Coromant 2004 12 s.
NTNU Untitled
 
49 Sørby, Knut; Tønnessen, Kjell; Torjusen, Jan Erik.
Methods for improving efficiency in turning Ti6Al4V. I: Ti-2003 Science and Technology. Wiley-VCH Verlagsgesellschaft 2004 ISBN 3-527-30306-5. s. 815-822
NTNU Untitled
 
2000
50 Sørby, Knut; Tønnessen, Kjell.
Methodology for selection of cutting tool and machining data for high speed flank milling. 2nd International Seminar on Improving Machine Tool Performance; 2000
NTNU Untitled
 
    Vis neste liste