Current Research Information SysTem In Norway
 
 

 English version


 
Hovedside
Forskningsresultater/NVI
Forskere
Prosjekter
Forskningsenheter
Logg inn
Om Cristin
 
 
   
Eksporter til


Viser treff 1-50 av 51 << Forrige 1 2    Neste >>

2021
1 Huang, Yao; Wang, Leigang; Shi, Mingxiao; Ma, Xiang.
A Contact and Friction Model for Forming of Galvanized Steel Sheet Based on Fractal Theory. The 13th International Conference on the Technology of Plasticity; 2021-07-25 - 2021-07-30
SINTEF Untitled
 
2 Huang, Yao; Wang, Leigang; Shi, Mingxiao; Ma, Xiang.
A Contact and Friction Model for Forming of Galvanized Steel Sheet Based on Fractal Theory. I: Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity. Springer 2021 ISBN 978-3-030-75381-8. s. 97-112
SINTEF Untitled
 
3 Ma, Xiang.
Digitalization case study: Lamination process and crack detection in solar cell. TaiyangNews What’s Hot In European Solar R&D; 2021-06-28 - 2021-06-30
SINTEF Untitled
 
4 Ma, Xiang.
Where digitalization is a goldmine, for real. Gemini [Internett] 2021-06-02
SINTEF Untitled
 
5 Shi, Mingxiao; Chen, Jiugong; Li, Jingyong; Mao, Weidong; Li, Shengliang; Ma, Xiang; Ni, Huifeng; Xia, Haochun.
Regulation of welding residual stress in laser-welded AISI 304 steel-niobium joints using a Cu interlayer. Welding in the World 2021 ;Volum 65.(12) s. 2283-2294
SINTEF Untitled
 
6 Tang, Kai; Gouttebroze, Sylvain; Ma, Xiang; Du, Qiang; Eijk, Casper van der.
Representation of the Multiphysical Properties of SiO2-Al2O3-CaO Slags by Deep Neural Networks. the 16th International Ferro-Alloys Congress (INFACON XVI) 2021; 2021-09-27 - 2021-09-29
SINTEF Untitled
 
7 Wang, Zhiqiang; Li, Qiang; He, Dakuo; Ma, Xiang.
Comparative Study on Prediction Methods of Copper Concentrate Grade for a Copper Flotation Process. 32nd Chinese Process Control Conference; 2021-07-30 - 2021-08-01
SINTEF Untitled
 
8 Wang, Zhiqiang; Li, Qiang; Wang, Xun; He, Dakuo; Ma, Xiang.
Condition Identification of Copper Flotation Process based on Foam Image and VGG16 Network. 33rd Chinese Control and Decision Conference (CCDC 2021); 2021-05-22 - 2021-05-24
SINTEF Untitled
 
2020
9 Andresen, Trond; S. Azar, Amin; Hovig, Even Wilberg; Ma, Xiang.
Additiv tilvirkning av varmevekslere. HighEFF - site visit Forskningsrådet; 2020-06-08
SINTEF ENERGISINT NTNU Untitled
 
10 Ma, Xiang; Bu, Huaitian; Rudzikas, Matas; Denafas, Julius; Ulbikas, Juras; Ulyashin, Alexander.
Combustion based delamination of Si based glass/glass photovoltaic modules. 37th European Photovoltaic Solar Energy Conference and Exhibition; 2020-09-07 - 2020-09-11
SINTEF Untitled
 
11 Zhao, Jian; Shi, Mingxiao; Li, Yanjun; Ma, Xiang; Zhenxing, Fan; Yan, Hua.
Laser welding of niobium to AISI 304 steel using a copper interlayer. Journal of Adhesion Science and Technology 2020 ;Volum 34.(20) s. 2161-2175
NTNU SINTEF Untitled
 
2019
12 Chen, Xuewen; Wang, Nana; Yuqing, Du; Wang, Guangxin; Zhang, Jingli; Ma, Xiang.
An elevated temperature damage model for 45Cr4NiMoV steel heavy backup rollers. Materials Research Express 2019 ;Volum 6.(8) s. 1-15
SINTEF Untitled
 
13 Hu, Luoke; Tang, Renzhong; Cai, Wei; Feng, Yixiong; Ma, Xiang.
Optimisation of cutting parameters for improving energy efficiency in machining process. Robotics and Computer-Integrated Manufacturing 2019 ;Volum 59. s. 406-416
SINTEF Untitled
 
14 Huang, Yao; Wang, Leigang; Ma, Xiang; Liu, Lei.
Microscopic failure mechanism of zinc layer in galvanized sheet during sheet forming process. Materials Science Forum 2019 ;Volum 944. s. 254-258
SINTEF Untitled
 
15 Lu, Baoshan; Wang, Leigang; Ma, Xiang.
Molecular Dynamics Simulation of Heat Transfer at Contact Interface of Hot Forming Die. IOP Conference Series: Materials Science and Engineering 2019 ;Volum 627.(1)
SINTEF Untitled
 
16 Shi, Mingxiao; Li, Yanjun; Ma, Xiang.
Cu Interlayer-Induced High-Strength Laser-Welded AISI 304 Steel-Niobium Joint. Journal of materials engineering and performance (Print) 2019 ;Volum 28.(9) s. 5369-5375
NTNU SINTEF Untitled
 
2018
17 Chen, Xuewen; Wang, Nana; Ma, Xiang; Zhou, Huijun.
Hot deformation behaviour and Hansel-Spittel constitutive model of Cr5 alloy for heavy backup roll. International Journal of Computational Materials Science and Surface Engineering (IJCMSSE) 2018 ;Volum 7.(3-4) s. 205-217
SINTEF Untitled
 
18 Hu, Hongjun; Qin, Xi; Zhang, Dingfei; Ma, Xiang.
A novel severe plastic deformation method for manufacturing AZ31 magnesium alloy tube. The International Journal of Advanced Manufacturing Technology 2018 ;Volum 98.(1-4) s. 897-903
SINTEF Untitled
 
19 Huang, Huilan; Liu, Manping; Wang, Xueli; Xing, Yuan; Jia, Zhihong; Tang, Kai; Ma, Xiang; Liu, Qing.
Atomic scale analysis of Hf-containing precipitates in an Al-Si-Mg-Hf alloy. Journal of Alloys and Compounds 2018 ;Volum 741. s. 1070-1079
SINTEF Untitled
 
20 Kalager, Harald; Skorpen, Kristian Grøtta; Simensen, Christian Julius; Ma, Xiang; Østhus, Rune; Roven, Hans Jørgen.
Co-extruded Al4.5Mg and rapidly solidified Al4.5Mg1Ag - structure and properties. The 16th International Conference on Aluminum Alloys - ICAA16; 2018-06-17 - 2018-06-21
NTNU SINTEF SRAUFOSS Untitled
 
21 Kalager, Harald; Skorpen, Kristian Grøtta; Simensen, Christian Julius; Ma, Xiang; Østhus, Rune; Roven, Hans Jørgen.
Co-extruded Al4.5Mg and rapidly solidified Al4.5Mg1Ag - structure and properties. I: ICAA16 : Proceedings of the 16th International Aluminum Alloys Conference 2018. Canadian Institute of Mining, Metallurgy and Petroleum 2018 ISBN 978-1-926872-41-4. s. -
NTNU SINTEF SRAUFOSS Untitled
 
22 Ma, Xiang; Simensen, Christian Julius; Østhus, Rune; Roven, Hans Jørgen.
Improvement of Hardness and Corrosion Resistance by Rapid Solidification of AlMgAg Alloys with co-extrusion. The 16th International conference on aluminium alloys - ICAA16; 2018-06-17 - 2018-06-21
NTNU SINTEF SRAUFOSS Untitled
 
23 M'hamdi, Mohammed; S. Azar, Amin; Ma, Xiang; Andreassen, Erik.
Design for Additive Manufacturing (DfAM): Material, process, properties and modelling tools. Subsea Valley Conference; 2018-03-21 - 2018-03-22
SINTEF Untitled
 
24 M'hamdi, Mohammed; S. Azar, Amin; Ma, Xiang; Andreassen, Erik.
Design for Additive Manufacturing: Material, process, properties and numerical modelling tools. Nasjonal konferanse for materialteknologi 2018; 2018-05-30 - 2018-05-31
SINTEF Untitled
 
2017
25 Ma, Xiang; Simensen, Christian Julius; Østhus, Rune; Dall, Wilhelm; Kalager, Harald; Roven, Hans Jørgen; Wang, Leigang.
Co-extrusion of Dual Aluminium Alloys with Special Surface Properties. Procedia Engineering 2017 ;Volum 207. s. 413-418
NTNU SINTEF SRAUFOSS Untitled
 
26 Yang, Jian; Liu, Guiwu; Shi, Zhongqi; Lin, Jianping; Ma, Xiang; Xu, Ziwei; Qiao, Guanjun.
An insight into β-Zn4Sb3 from its crystal structure, thermoelectric performance, thermal stability and graded material. Materials Today Energy 2017 ;Volum 3. s. 72-83
SINTEF Untitled
 
27 Zhang, Wenlong; Ma, Xiang; Ding, Dongyan.
Aging behavior and tensile response of a SiCw reinforced eutectoid zinc-aluminium-copper alloy matrix composite. Journal of Alloys and Compounds 2017 ;Volum 727. s. 375-381
SINTEF Untitled
 
28 Zhou, Renyuan; Zhu, Lihui; Liu, Yanyan; Lu, Zhengran; Chen, Liang; Ma, Xiang.
Microstructural evolution and the effect on hardness of Sanicro 25 welded joint base metal after creep at 973 K. Journal of Materials Science 2017 ;Volum 52.(11) s. 6161-6172
SINTEF Untitled
 
2016
29 Lin, Yongcheng; He, Dao-Guang; Chen, Ming-Song; Chen, Xiao-Min; Zhao, Chun-Yang; Ma, Xiang.
Study of flow softening mechanisms of a nickel-based superalloy with phase. Archives of Metallurgy and Materials 2016 ;Volum 61.(3) s. 1191-1200
SINTEF Untitled
 
30 Lin, Yongcheng; He, Dao-Guang; Chen, Ming-Song; Chen, Xiao-Min; Zhao, Chun-Yang; Ma, Xiang; Long, Zhi-Li.
EBSD analysis of evolution of dynamic recrystallization grains and δ phase in a nickel-based superalloy during hot compressive deformation. Materials & design 2016 ;Volum 97. s. 13-24
SINTEF Untitled
 
31 Lin, Yongcheng; Liu, Guan; Chen, Ming-Song; Huang, Yuan-Chun; Chen, Zhi-Guo; Ma, Xiang; Jiang, Yu-Qiang; Li, Jia.
Corrosion resistance of a two-stage stress-aged Al-Cu-Mg alloy: Effects of stress-aging temperature. Journal of Alloys and Compounds 2016 ;Volum 657. s. 855-865
SINTEF Untitled
 
32 Lin, Yongcheng; Liu, Yan-Xing; Chen, Ming-Song; Huang, Ming-Hui; Ma, Xiang; Long, Zhi-Li.
Study of static recrystallization behavior in hot deformed Ni-based superalloy using cellular automaton model. Materials & design 2016 ;Volum 99. s. 107-114
SINTEF Untitled
 
33 Lin, Yongcheng; Wen, Dong-Xu; Chen, Ming-Song; Liu, Yan-Xing; Chen, Xiao-Min; Ma, Xiang.
Improved dislocation density-based models for describing hot deformation behaviors of a Ni-based superalloy. Journal of Materials Research 2016 ;Volum 31.(16) s. 2415-2429
SINTEF Untitled
 
34 Lin, Yongcheng; Zhang, Jin-Long; Chen, Ming-Song; Zhou, Ying; Ma, Xiang.
Electrochemical corrosion behaviors of a stress-aged Al-Zn-Mg-Cu alloy. Journal of Materials Research 2016 ;Volum 31.(16) s. 2493-2505
SINTEF Untitled
 
35 Liu, Manping; Cheng, Xiaonong; Sun, Shaochun; Ma, Xiang; Tang, Kai; Jia, Zhihong; Roven, Hans Jørgen.
Characterization and simulation in ultrahigh strength nanograined Al-Mg alloys. IUMRS -ICA 2016, 17th International conference in Asia; 2016-10-20 - 2016-10-24
NTNU SINTEF Untitled
 
36 Ma, Xiang; Sagvolden, Espen; Andersson, Stefan; Tang, Kai; Dalaker, Halvor.
Reactive Molecular Dynamics and its Applications. 2016 International Symposium on Multi-scale Modeling and Simulation of Materials; 2016-07-10 - 2016-07-14
SINTEF Untitled
 
37 Ma, Xiang; Simensen, Christian Julius; Østhus, Rune; Jensrud, Ola; Dall, Wilhelm; Nordmark, Arne; Roven, Hans Jørgen.
Production of A Dual Aluminum Alloy with Distinguished Surface Properties by Co-extrusion. IUMRS-ICA 2016, 17th International conference in Asia; 2016-10-20 - 2016-10-24
NTNU SRAUFOSS SINTEF Untitled
 
38 Wang, Leigang; Huang, Yao; Ma, Xiang.
Microscopic Failure Mechanism of Zinc Layer in Galvanized Sheet during Sheet Forming Process. IUMRS-ICA 2016, 17th International conference in Asia; 2016-10-20 - 2016-10-24
SINTEF Untitled
 
2015
39 Ma, Xiang; Tang, Kai.
Reaction mechanisms in formation of silicon carbide using SiO and CH4 gases on various solid surfaces. Proceedings of the 5th International Conference on Machinery, Materials Science and Engineering Applications (MMSE 2015); 2015-06-27 - 2015-06-27
SINTEF Untitled
 
40 Ma, Xiang; Tang, Kai; Azar, Amin Shahrestani.
CFD Simulation of High Temperature Plasma Processing in Graphene Synthesis. TMS 2015; 2015-03-15 - 2015-03-19
SINTEF Untitled
 
41 Tang, Kai; Du, Qiang; Ma, Xiang; Liu, Z-K.
Grain Boundary Segregation of Copper Impurity in Bicrystal Silicon. 1st International Conference on Computational Design and Simulation of Materials; 2015-08-17 - 2015-08-20
SINTEF Untitled
 
42 Tang, Kai; Ma, Xiang; Andersson, Stefan; Dalaker, Halvor.
Reaction Mechanism between SiO and CH4 at High Temperature. TMS 2015; 2015-03-15 - 2015-03-19
SINTEF Untitled
 
2014
43 Gouttebroze, Sylvain; Autruffe, Antoine; Aas, Lars Martin Sandvik; Kildemo, Morten; Ma, Xiang.
Effect of Grain Orientation and Cooling Rate on Stress Distribution in a Small-scale Silicon Ingot. Metallurgical and Materials Transactions E 2014 ;Volum 1.(2) s. 180-186
NTNU SINTEF Untitled
 
44 Gouttebroze, Sylvain; Autruffe, Antoine; Sandvik Aas, Lars Martin; Kildemo, Morten; Ma, Xiang.
Effect of Grain Orientation and Cooling Rate on Stress Distribution in a Small-scale Silicon Ingot. TMS Annual meeting; 2014-02-16 - 2014-02-20
NTNU SINTEF Untitled
 
45 Tang, Kai; Løvvik, Ole Martin; Safarian-Dastjerdi, Jafar; Ma, Xiang; Tangstad, Merete.
Removal of Phosphorus in Metallurgical Silicon by Rare Earth Elements. Metallurgical and Materials Transactions E 2014 ;Volum 1.(3) s. 257-262
NTNU SINTEF Untitled
 
2013
46 Gouttebroze, Sylvain; Lange, Hans Iver; Ma, Xiang; Gløckner, Ronny; Emamifard, Behnaz; Syvertsen, Martin; Vardavoulias, Michalis; Ulyashin, Alexander.
Comparative analysis of mechanical properties of Si substrates processed by different routes. Physica status solidi. A, Applied research 2013 ;Volum 210.(4) s. 777-784
SINTEF Untitled
 
2012
47 Bikass, S.; Andersson, B.; Pilipenko, A.; Ma, Xiang.
Distortion Mechanisms due to the Cooling Process in Aluminum Extrusion. Tenth International Aluminium Extrusion Technology Seminar and Exposition; 2012-05-15 - 2012-05-18
SINTEF Untitled
 
2011
48 Park, Jae-hoon; Yoo, Bum-yul; Kim, Young-ho; Ma, Xiang.
Stress Analysis of Ultrasonic-Assisted Upsetting based on Two Dynamic Friction Models. Steel Research International 2011 Suppl. ICTP10 s. 251-256
SINTEF Untitled
 
2010
49 Bikass, S.; Andersson, B.; Ma, Xiang.
An Approach to Simulate Shape Distortion due to Cooling in Aluminum Extrusion. Key Engineering Materials 2010 ;Volum 424. s. 65-70
SINTEF Untitled
 
2009
50 Ma, Xiang; Lapovok, R.; Gu, C.; Molotnikov, A.; Estrin, Y.; Pereloma, E.V.; Davies, C.H.J.; Hodgson, P.D..
Deep drawing behaviour of ultrafine grained copper: modelling and experiment. Journal of Materials Science 2009 ;Volum 44. s. 3807-3812
SINTEF Untitled
 
    Vis neste liste