Current Research Information SysTem In Norway
 
 

 English version


 
Hovedside
Forskningsresultater/NVI
Forskere
Prosjekter
Forskningsenheter
Logg inn
Om Cristin
 
 
   
Eksporter til


Viser treff 1-50 av 164 << Forrige 1 2 3 4    Neste >>

2017
1 Berto, Filippo; Campagnolo, Alberto; Welo, Torgeir; Vantadori, Sabrina; Carpinteri, Andrea.
Multiaxial fatigue strength of titanium alloys. Frattura ed Integrità Strutturale 2017 ;Volum 11.(41) s. 79-89
NTNU Untitled
 
2 Chebat, F; Cincera, M; Razavi, SMJ; Berto, Filippo; Welo, Torgeir.
Fatigue assessment of steel rollers by means of the local energy. Frattura ed Integrità Strutturale 2017 ;Volum 11.(41) s. 447-455
NTNU Untitled
 
3 Farstad, Jan Magnus Granheim; Netland, Øyvind; Welo, Torgeir.
Comparison of Cross Section Distortions in Single Step Roll Bending and Incremental Roll Bending of Aluminium Extrusions. Esaform 2017; 2017-04-26 - 2017-04-28
NTNU Untitled
 
4 Farstad, Jan Magnus Granheim; Netland, Øyvind; Welo, Torgeir.
Surface Friction of Rapidly Prototyped Wheels from 3D-Printed Thermoplastic Elastomers: An Experimental Study. Cirp Design 2017; 2017-05-10 - 2017-05-12
NTNU Untitled
 
5 Farstad, Jan Magnus Granheim; Netland, Øyvind; Welo, Torgeir.
Surface Friction of Rapidly Prototyped Wheels from 3D-Printed Thermoplastic Elastomers: An Experimental Study. Procedia CIRP 2017 ;Volum 60. s. 247-252
NTNU Untitled
 
6 Fergani, Omar; Berto, Filippo; Welo, Torgeir; Liang, Steven.
Analytical Modeling of Residual Stress in Additive Manufacturing. Fatigue & Fracture of Engineering Materials & Structures 2017 ;Volum 40.(6) s. 971-978
NTNU Untitled
 
7 Fergani, Omar; Tronvoll, Sigmund Arntsønn; Brøtan, Vegard; Welo, Torgeir; Sørby, Knut.
Additive-Manufactured Sandwich Lattice Structures: A Numerical and Experimental Investigation. ESAFORM 2017 - The International ESAFORM Conference on Material Forming; 2017-04-26 - 2017-04-28
NTNU Untitled
 
8 Fergani, Omar; Yousfi, Mohammed; Ding, Zishan; Welo, Torgeir; Liang, Steven Y..
A physics-based approach to relate grinding process parameters to tribological behavior of ground surfaces. The International Journal of Advanced Manufacturing Technology 2017 ;Volum 91.(9-12) s. 4151-4161
NTNU Untitled
 
9 Moldavska, Anastasiia; Welo, Torgeir.
The concept of sustainable manufacturing and its definitions: A content-analysis based literature review. Journal of Cleaner Production 2017 ;Volum 166. s. 744-755
NTNU Untitled
 
10 Netland, Øyvind; Farstad, Jan Magnus Granheim; Welo, Torgeir.
Design of a Modular Extrusion-based Aluminum Monorail System for Highly Accurate Car Positioning. Procedia CIRP 2017 ;Volum 60. s. 8-13
NTNU Untitled
 
11 Razavi, SMJ; Peron, M; Torgersen, Jan; Berto, Filippo; Welo, Torgeir.
40CrMoV13.9 notched specimens under multiaxial fatigue: An overview of recent results. Frattura ed Integrità Strutturale 2017 ;Volum 11.(41) s. 440-446
NTNU Untitled
 
12 Tronvoll, Sigmund Arntsønn; Elverum, Christer Westum; Welo, Torgeir.
Prototype Experiments: Strategies and Trade-offs. Procedia CIRP 2017 ;Volum 60. s. 554-559
NTNU Untitled
 
2016
13 Berto, Filippo; Campagnolo, A.; Chebat, F.; Cincera, M.; Welo, Torgeir.
Modelling and fatigue assessment of steel rollers with failure occurring at the weld root based on the local strain energy. 21st European Conference on Fracture (ECF21); 2016-06-20 - 2016-06-24
NTNU Untitled
 
14 Berto, Filippo; Campagnolo, Alberto; Chebat, F; Cincera, M; Welo, Torgeir.
Modelling and fatigue assessment of steel rollers with failure occurring at the weld root based on the local strain energy. Procedia Structural Engineering 2016 ;Volum 2. s. 3475-3482
NTNU Untitled
 
15 Berto, Filippo; Campagnolo, Alberto; Welo, Torgeir.
Local strain energy density to assess the multiaxial fatigue strength of titanium alloys. Frattura ed Integrità Strutturale 2016 ;Volum 10.(37) s. 69-79
NTNU Untitled
 
16 Brøtan, Vegard; Fergani, Omar; Sørby, Knut; Welo, Torgeir.
MECHANICAL PROPERTIES OF BIOCOMPATIBLE 316L STEEL RHOMBIC DODECAHEDRON LATTICE STRUCTURES. International Solid Freeform Fabrication Symposium; 2016-08-07 - 2016-08-10
NTNU Untitled
 
17 Ellingsen, Oda Linn Almo; Welo, Torgeir.
Managing exploration and exploitation: commercialization case from advanced manufacturing. I: The Proceedings of The XXVII ISPIM Conference 2016 Porto, Portugal - 19-22 June 2016. Lappeenranta University of Technology Press 2016 ISBN 978-952-265-929-3. s. -
NTNU Untitled
 
18 Elverum, Christer Westum; Welo, Torgeir.
Leveraging prototypes to generate value in the concept-to-production process: a qualitative study of the automotive industry. International Journal of Production Research 2016 ;Volum 54.(10) s. 3006-3018
NTNU Untitled
 
19 Elverum, Christer Westum; Welo, Torgeir; Tronvoll, Sigmund Arntsønn.
Prototyping in New Product Development: Strategy Considerations. 26th CIRP Design Conference; 2016-06-15 - 2016-06-17
NTNU Untitled
 
20 Elverum, Christer Westum; Welo, Torgeir; Tronvoll, Sigmund Arntsønn.
Prototyping in new product development: Strategy considerations. Procedia CIRP 2016 ;Volum 50. s. 117-122
NTNU Untitled
 
21 Erichsen, Jorgen Andreas Bogen; Pedersen, Andreas; Steinert, Martin; Welo, Torgeir.
Learning in Product Development: Proposed Industry Experiment Using Reflective Prototyping. Procedia CIRP 2016 ;Volum 50. s. 454-459
NTNU Untitled
 
22 Erichsen, Jorgen Andreas Bogen; Pedersen, Andreas; Steinert, Martin; Welo, Torgeir.
Prototyping to Leverage Learning in Product Manufacturing Environments. Procedia CIRP 2016 ;Volum 54. s. 233-238
NTNU Untitled
 
23 Erichsen, Jorgen Andreas Bogen; Pedersen, Andreas; Steinert, Martin; Welo, Torgeir.
Using Prototypes to Leverage Knowledge in Product Development: Examples from the Automotive Industry. I: 2016 IEEE International Systems Conference (SysCon 2016) Proceedings. IEEE conference proceedings 2016 ISBN 978-1-4673-9518-2. s. 491-496
NTNU Untitled
 
24 Farstad, Jan Magnus Granheim; Netland, Øyvind; Welo, Torgeir.
Evaluation of undesirable deformations in complex, hollow aluminium extrusions due to roll bending. AIP Conference Proceedings 2016 ;Volum 1769.(1) s. -
NTNU Untitled
 
25 Farstad, Jan Magnus Granheim; Netland, Øyvind; Welo, Torgeir.
Evaluation of Undesirable Deformations in Complex, Hollow Aluminium Extrusions due to Roll Bending. 19th International ESAFORM Conference on Material Forming; 2016-04-27 - 2016-04-29
NTNU Untitled
 
26 Fergani, Omar; Jiang, Xiaohui; Welo, Torgeir.
Analysis of residual stress-induced distortions of thin sheet structures in multi-step milling. AIP Conference Proceedings 2016 ;Volum 1769. s. -
NTNU Untitled
 
27 Fergani, Omar; Pan, Zhipeng; Liang, Steven; zoubir, atmani; Welo, Torgeir.
Microstructure Texture Prediction in Machining Processes. Procedia CIRP 2016 ;Volum 46. s. 595-598
NTNU Untitled
 
28 Granly, Bjørg Margrethe; Welo, Torgeir.
Strategic sustainable production: Exploring practices and context in Norwegian manufacturing SMEs. International Conference on Business, Policy and Sustainability; 2016-06-16 - 2016-06-17
NTNU Untitled
 
29 Hosseini, Hossein Neizan; Welo, Torgeir.
A framework for integrating reliability and systems engineering: proof-of-concept experiences. INCOSE International Symposium 2016 ;Volum 26.(1) s. 1059-1073
NTNU Untitled
 
30 Moldavska, Anastasiia; Welo, Torgeir.
Development of Manufacturing Sustainability Assessment Using Systems Thinking. Sustainability 2016 ;Volum 8.(1) s. -
NTNU Untitled
 
31 Ringen, Geir; Welo, Torgeir; Østerbø, Emma.
Learning and Knowledge Systems in Product Development Environments. Procedia CIRP 2016 ;Volum 57. s. 49-54
NTNU SRAUFOSS Untitled
 
32 Rølvåg, Terje; Welo, Torgeir; van Houten, Rien; Wiggenraad, Jaap.
FE simulation of soft wing impactor for aviation mast frangibility testing – sensitivity to model assumptions. International Journal of Crashworthiness 2016 ;Volum 21.(5) s. 435-451
NTNU Untitled
 
33 Synnes, Elisabeth Lervåg; Welo, Torgeir.
Bridging the Gap Between High and Low-Volume Production through Enhancement of Integrative Capabilities. Procedia Manufacturing 2016 ;Volum 5. s. 26-40
NTNU Untitled
 
34 Synnes, Elisabeth Lervåg; Welo, Torgeir.
Enhancing Integrative Capabilities through Lean Product and Process Development. Procedia CIRP 2016 ;Volum 54. s. 221-226
NTNU Untitled
 
35 Tronvoll, Sigmund Arntsønn; Elverum, Christer Westum; Welo, Torgeir.
Test Environments in Engineering Design: A conceptual study. I: NordDesign 2016. The Design Society 2016 ISBN 978-1-904670-80-3. s. 134-143
NTNU Untitled
 
36 Tronvoll, Sigmund Arntsønn; Elverum, Christer Westum; Welo, Torgeir.
Test Environments in Engineering Design: A conceptual study. NordDesign 2016; 2016-08-10 - 2016-08-12
NTNU Untitled
 
37 Ulonska, Søren; Welo, Torgeir.
On the use of product portfolio and variant maps as visualization tools to support platform-based development strategies. Concurrent Engineering - Research and Applications 2016 ;Volum 24.(3) s. 211-226
NTNU Untitled
 
38 Welo, Torgeir.
Forming of Aluminum Extrusions for Automotive Applications: Opportunities and Challenges. Konferanse; 2016-10-26 - 2016-10-28
NTNU Untitled
 
39 Welo, Torgeir; Ringen, Geir.
Beyond Waste Elimination: Assessing Lean Practices in Product Development. Procedia CIRP 2016 ;Volum 50. s. 179-185
NTNU SRAUFOSS Untitled
 
40 Welo, Torgeir; Ringen, Geir.
Customer-focused development practices in Systems Engineering companies A case study across industry sectors. I: 2016 IEEE International Systems Conference (SysCon 2016) Proceedings. IEEE conference proceedings 2016 ISBN 978-1-4673-9518-2. s. -
NTNU Untitled
 
2015
41 Duflou, Joost R; Tekkaya, A Erman; Haase, Matthias; Welo, Torgeir; Vanmeensel, Kim; Kellens, Karel; Dewulf, Wim; Paraskevas, Dimos.
Environmental assessment of solid state recycling routes for aluminium alloys: Can solid state processes significantly reduce the environmental impact of aluminium recycling?. CIRP annals 2015 ;Volum 64.(1) s. 37-40
NTNU Untitled
 
42 Elverum, Christer Westum; Dalsgaard, Henrik Vagle; Welo, Torgeir.
Continuous improvement of technical systems using Design for X. I: Proceedings of 2015 10th System of Systems Engineering Conferences (SoSE): May 17-20 2015 San Antonio, TX, USA. IEEE conference proceedings 2015 ISBN 9781479976119. s. 176-181
NTNU Untitled
 
43 Elverum, Christer Westum; Welo, Torgeir.
On the use of directional and incremental prototyping in the development of high novelty products: Two case studies in the automotive industry. Journal of engineering and technology management 2015 ;Volum 38. s. 71-88
NTNU Untitled
 
44 Elverum, Christer Westum; Welo, Torgeir; Dalsgaard, Henrik Vagle.
Continuous improvement of technical systems using Design for X. 10th Annual System of Systems Engineering Conference; 2015-05-17 - 2015-05-20
NTNU Untitled
 
45 Fergani, Omar; Jiang, Xiaohui; Shao, Yamin; Welo, Torgeir; Yang, Jianguo; Liang, Steven.
Prediction of residual stress regeneration in multi-pass milling. The International Journal of Advanced Manufacturing Technology 2015 ;Volum 83.(5) s. 1153-1160
NTNU Untitled
 
46 Kriesi, Carlo; Steinert, Martin; Aalto-Setälä, Laura; Anvik, Anders; Balters, Stephanie; Baracchi, Alessia; Jensen, Matilde Bisballe; Bjørkli, Leif-Erik; Buzzaccaro, Nicolo; Cortesi, Dario; D'Onghia, Francesco; Dosi, Clio; Franchini, Giulia; Fuchs, Matt; Gerstenberg, Achim; Hansen, Erik; Hiekkanen, Karri Matias; Hyde, David; Ituarte, Iñigo; Kalasniemi, Jani; Kurikka, Joona; Lanza, Irene; Laurila, Anssi; Lee, Tik-Ho; Lønvik, Siri; Mansikka-Aho, Anniina; Nordberg, Markus; Oinonen, Päivi; Pedrelli, Luca; Pekuri, Anna; Rane, Enna; Reime, Thov; Repokari, Lauri; Rønningen, Martin; Rowlands, Stephanie; Sjöman, Heikki; Slåttsveen, Kristoffer B; Strachan, Andy; Strømstad, Kirsti; Suren, Stian; Tapio, Peter; Utriainen, Tuuli; Vignoli, Matteo; Vijaykumar, Saurabh; Welo, Torgeir; Wulvik, Andreas.
Distributed Experiments in Design Sciences, A Next Step in Design Observation Studies?. I: DS 80-2 Proceedings of the 20th International Conference on Engineering Design (ICED 15) Vol 2: Design Theory and Research Methodology Design Processes, Milan, Italy, 27-30.07.15. The Design Society 2015 ISBN 978-1-904670-65-0. s. 319-328
NTNU Untitled
 
47 Marthinusen, Ivar; Welo, Torgeir; Kalavrytinos, Christos; Sivertsen, Ole Ivar.
Using factors associated with the lean concept in PD for identifying potential for design automation (Knowledge Based Engineering). IEEE conference proceedings 2015 (ISBN 978-1-4673-7156-8) 7 s.
NTNU Untitled
 
48 Moldavska, Anastasiia; Welo, Torgeir.
On the Applicability of Sustainability Assessment Tools in Manufacturing. Procedia CIRP 2015 ;Volum 29. s. 621-626
NTNU Untitled
 
49 Ringen, Geir; Welo, Torgeir.
Knowledge Based Development Practices in Systems Engineering Companies: A Comparative Study. I: 2015 9th Annual IEEE International Systems Conference (SysCon 2015). Curran Associates, Inc. 2015 ISBN 9781479959280. s. 353-358
NTNU SRAUFOSS Untitled
 
50 shaoa, yamin; Fergani, Omar; Welo, Torgeir; Liang, Steven.
Prediction of Residual Stress in Multi-Step Orthogonal Cutting. I: ASME 2015 International Manufacturing Science and Engineering Conference Volume 1: Processing Charlotte, North Carolina, USA, June 8–12, 2015. ASME Press 2015 ISBN 978-0-7918-5682-6.
NTNU Untitled
 
    Vis neste liste