Current Research Information SysTem In Norway
 
 

 English version


 
Hovedside
Forskningsresultater/NVI
Forskere
Prosjekter
Forskningsenheter
Logg inn
Om Cristin
 
 
   
Eksporter til


Viser treff 1-50 av 69 << Forrige 1 2    Neste >>

2019
1 Andreassen, Erik.
An introduction to additive manufacturing with engineering plastics. energy:connected'19; 2019-04-10 - 2019-04-11
USN SINTEF Untitled
 
2 Andreassen, Erik; Baturynska, Ivanna; Johansen, Marius; Andersen, Marius Endre.
Mechanical properties of polyamide 12 parts made by powder bed fusion (additive manufacturing). Nordic Polymer Days 2019; 2019-06-05 - 2019-06-07
USN NTNU SINTEF Untitled
 
3 Hovig, Even Wilberg; S. Azar, Amin; Sunding, Martin Fleissner; Andreassen, Erik; Sørby, Knut.
High cycle fatigue life estimation of materials processed by laser powder bed fusion. Fatigue & Fracture of Engineering Materials & Structures 2019 ;Volum 42.(7) s. 1454-1466
NTNU SINTEF Untitled
 
4 Jørgensen, Jens Kjær; Andreassen, Erik; Salaberger, Dietmar.
The Effect of Fiber Concentration on Fiber Orientation in Injection Molded Film Gated Rectangular Plates. Polymer Composites 2019 ;Volum 40.(2) s. 615-629
SINTEF Untitled
 
5 Persson, Anna-Maria Märta Ruth; Andreassen, Erik; Johansen, Marius; Hinrichsen, Einar L.
Thermoplastic elastomers – A study on adhesion in two-component injection moulding. Nordic Rubber Conference 2019; 2019-05-21 - 2019-05-22
USN NTNU SINTEF Untitled
 
6 Persson, Anna-Maria Märta Ruth; Andreassen, Erik; Martinsen, Kristian; Hinrichsen, Einar L.
Thermoplastic elastomers – Long-term mechanical properties for sealing applications. Nordic Polymer Days 2019; 2019-06-05
USN NTNU SINTEF Untitled
 
2018
7 Hovig, Even Wilberg; S. Azar, Amin; Grytten, Frode; Sørby, Knut; Andreassen, Erik.
Determination of Anisotropic Mechanical Properties for Materials Processed by Laser Powder Bed Fusion. Advances in Materials Science and Engineering 2018 ;Volum 2018. s. -
NTNU SINTEF Untitled
 
8 Hovig, Even Wilberg; S. Azar, Amin; Sunding, Martin Fleissner; Sørby, Knut; Andreassen, Erik.
Anisotropic fatigue properties of IN718 produced by powder bed fusion. TMS 2018 147th annual meeting & exhibition; 2018-03-11 - 2018-03-15
NTNU SINTEF Untitled
 
9 Hovig, Even Wilberg; S. Azar, Amin; Sunding, Martin Fleissner; Sørby, Knut; M'hamdi, Mohammed; Andreassen, Erik.
High cycle fatigue life estimation of AlSi10Mg processed by laser powder bed fusion. MATEC Web of Conferences 2018 ;Volum 188. s. -
NTNU SINTEF Untitled
 
10 M'hamdi, Mohammed; S. Azar, Amin; Ma, Xiang; Andreassen, Erik.
Design for Additive Manufacturing (DfAM): Material, process, properties and modelling tools. Subsea Valley Conference; 2018-03-21 - 2018-03-22
SINTEF Untitled
 
11 M'hamdi, Mohammed; S. Azar, Amin; Ma, Xiang; Andreassen, Erik.
Design for Additive Manufacturing: Material, process, properties and numerical modelling tools. Nasjonal konferanse for materialteknologi 2018; 2018-05-30 - 2018-05-31
SINTEF Untitled
 
12 Vereshchagina, Elizaveta; Andreassen, Erik; Batalden, Jørn; Plassen, Martin; Mielnik, Michal Marek.
Simultaneous improvement of surface finish and bonding of centrifugal microfluidic devices in cyclo-olefin polymers. I: 2018 IEEE Micro Electro Mechanical Systems (MEMS), 2018, Belfast UK, 21-25 Jan. 2018. IEEE 2018 ISBN 978-1-5386-4783-7. s. 1257-1260
SINTEF Untitled
 
13 Vereshchagina, Elizaveta; Carmona, Pierre; Andreassen, Erik; Batalden, Jørn; Plassen, Martin; Mielnik, Michal Marek.
Simultaneous improvement of surface finish and bonding of centrifugal microfluidic devices in cyclo-olefin polymers. The 31st IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2018; 2018-01-21 - 2018-01-25
USN SINTEF Untitled
 
2017
14 Andreassen, Erik.
Additiv tilvirkning med plastmaterialer (termoplast, herdeplast, elastomerer, kompositter). Åpent seminar innen industriell additiv tilvirkning; 2017-12-05 - 2017-12-05
SINTEF Untitled
 
15 Andreassen, Erik.
En introduksjon til additiv tilvirkning med metall og plast. Fagdag om digitalisering og 3D-printing; 2017-06-07 - 2017-06-07
SINTEF Untitled
 
16 Andreassen, Erik.
En introduksjon til additiv tilvirkning med metall og plast. Teknologinettverk Telemark; 2017-05-05 - 2017-05-05
SINTEF Untitled
 
17 Andreassen, Erik; Kviserud, Knut Richard.
Rimeligere og raskere utvikling av sprøytestøpte plastprodukter ved bruk av rimelige forminnsatser lagd med additiv tilvirkning. Frokostseminar; 2017-09-05 - 2017-09-05
SINTEF Untitled
 
18 Rambæk, Ida; Vereshchagina, Elizaveta; Mielnik, Michal Marek; Andreassen, Erik.
New allergy test promises safer antibiotic use. Gemini (English edition) 2017
SINTEF Untitled
 
19 Rambæk, Ida; Vereshchagina, Elizaveta; Mielnik, Michal Marek; Andreassen, Erik.
Tryggere antibiotikabruk med ny allergitest. Gemini 2017
SINTEF Untitled
 
20 Vereshchagina, Elizaveta; Andreassen, Erik; Gaarder, Rune Harald; Mielnik, Michal Marek.
Synergy of 3D printing and injection molding: A new prototyping method for rapid design optimization and manufacturing of microfluidic devices. The 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences, µTAS 2017 Conference; 2017-10-22 - 2017-10-26
USN SINTEF Untitled
 
2016
21 Tjulkins, Fjodors; Nguyen Thai, Anh Tuan; Andreassen, Erik; Hoff, Lars; Grymyr, Ole-Johannes; Halvorsen, Per Steinar; Imenes, Kristin.
An Implantable Accelerometer-based Heart Monitoring Device with Improved Positional Stability. Journal of Medical Devices 2016 ;Volum 10.(4)
USN OUS SINTEF Untitled
 
2015
22 Andreassen, Erik.
3D-printede støpeformer i plast kan utfordre dyrt stål. Teknisk ukeblad [Internett] 2015-04-19
SINTEF Untitled
 
23 Andreassen, Erik; Boivie, Klas Magnus.
Additiv tilvirkning – Kompetansebygging i norsk industri. Forum for maskinering og additiv tilvirkning; 2015-11-04
SINTEF SRAUFOSS Untitled
 
24 Dragland, Åse Kirsti; Andreassen, Erik.
3D-hjelp til fattige gründere og kreative sjeler. Gemini.no [Internett] 2015-04-15
SINTEF Untitled
 
25 Jørgensen, Jens Kjær; Andreassen, Erik; Salaberger, Dietmar.
Effect of Fibre Concentration on the Fibre Orientation in Film Gated Injection Molded Plaques. Polymer Processing Society Conference 2015, Graz; 2015-09-21 - 2015-09-25
USN NTNU Untitled
 
26 Tjulkins, Fjodors; Nguyen Thai, Anh Tuan; Andreassen, Erik; Aasmundtveit, Knut Eilif; Høivik, Nils Deneke; Hoff, Lars; Halvorsen, Per Steinar; Grymyr, Ole-Johannes; Imenes, Kristin.
Fabrication and assembly of MEMS accelerometer-based heart monitoring device with simplified, one step placement. Journal of Medical Engineering & Technology 2015 ;Volum 39.(1) s. 69-74
USN OUS SINTEF Untitled
 
2014
27 Andreassen, Erik.
Component performance and functionality via processing and hybrid material solutions. Nordic Polymer Days 2014; 2014-06-10 - 2014-06-12
SINTEF Untitled
 
28 Andreassen, Erik; Mielnik, Michal Marek.
BioMEMS meets lab-on-a-chip: Heterogeneous integration of silicon MEMS and NEMS in polymer microfluidics. I: Electronics System-Integration Technology Conference (ESTC), 2014, Helsinki. 16-18 Sept. 2014. IEEE conference proceedings 2014 ISBN 978-1-4799-4025-7. s. -
SINTEF Untitled
 
29 Granlund, Håvard; Andreassen, Erik; Skjønsfjell, Eirik Torbjørn Bakken; Høydalsvik, Kristin; Diaz, Ana; Breiby, Dag Werner.
Measuring and simulating morphology gradients in injection-molded talc-reinforced isotactic polypropylene. Journal of Polymer Science Part B: Polymer Physics 2014 ;Volum 52.(17) s. 1157-1167
NTNU SINTEF Untitled
 
30 Skjønsfjell, Eirik Torbjørn Bakken; Granlund, Håvard; Kringleland, Torbjørn; Høydalsvik, Kristin; Fløystad, Jostein Bø; Diaz, Ana; Andreassen, Erik; Breiby, Dag Werner.
Towards 3D Orientation Distribution Mapping By SAXS Tomography. 11th Nordic Workshop on Scattering from Soft Matter; 2014-01-16 - 2014-01-17
NTNU SINTEF Untitled
 
31 Tjulkins, Fjodors; Nguyen Thai, Anh Tuan; Andreassen, Erik; Hoivik, Nils; Aasmundtveit, Knut Eilif; Hoff, Lars; Grymyr, Ole-Johannes; Halvorsen, Per Steinar; Imenes, Kristin.
MEMS-based implantable heart monitoring system with integrated pacing function. I: 2014 IEEE 64th Electronic Components and Technology Conference (ECTC), 27-30 May 2014, Florida, USA. IEEE conference proceedings 2014 ISBN 978-1-4799-2406-6. s. 139-144
USN OUS SINTEF Untitled
 
2013
32 Granlund, Håvard; Fløystad, Jostein Bø; Esmaeili, Morteza; Bakken, Eirik Torbjørn; Bech, Martin; Vullum, Per Erik; Andreassen, Erik; Breiby, Dag Werner.
Mapping structural gradients in isotactic polypropylene using scanning wide-angle X-ray scattering. Polymer 2013 ;Volum 54.(7) s. 1867-1875
NTNU SINTEF Untitled
 
33 Mielnik, Michal Marek; Tofteberg, Terje; Andreassen, Erik.
Heterogeneous integration of silicon fluidic components in polymer chips. I: 17th international conference on miniaturized systems for chemistry and life sciences, 2013, Freiburg, Germany, 27-31 Oct, 2013. : Chemical and Biological Microsystems Society 2013 ISBN 978-0-9798064-6-9. s. 796-798
SINTEF Untitled
 
34 Nguyen, Hoang Vu; Andreassen, Erik; Kristiansen, Helge; Aasmundtveit, Knut E..
Die Shear Testing of a Novel Isotropic Conductive Adhesive-Epoxy Filled With Metal-Coated Polymer Spheres. IEEE Transactions on Components, Packaging, and Manufacturing Technology 2013 ;Volum 3.(7) s. 1084-1093
USN SINTEF Untitled
 
35 Nguyen, Hoang Vu; Andreassen, Erik; Kristiansen, Helge; Johannessen, Rolf; Hoivik, Nils; Aasmundtveit, Knut E..
Rheological characterization of a novel isotropic conductive adhesive - Epoxy filled with metal-coated polymer spheres. Materials & Design 2013 ;Volum 46. s. 784-793
USN SINTEF Untitled
 
36 Skjønsfjell, Eirik Torbjørn Bakken; Granlund, Håvard; Fløystad, Jostein Bø; Høydalsvik, Kristin; Diaz, Ana; Andreassen, Erik; Breiby, Dag Werner.
Towards orientation distribution mapping in isotactic polypropylene by SAXS-tomography. International Congress on X-Ray Optics and Microanalysis (ICXOM); 2013-09-02 - 2013-09-06
USN NTNU SINTEF Untitled
 
37 Tjulkins, Fjodors; Nguyen Thai, Anh Tuan; Hoivik, Nils; Aasmundtveit, Knut E.; Andreassen, Erik; Hoff, Lars; Imenes, Kristin.
3-Axis MEMS accelerometer-based implantable heart monitoring system with novel fixation method. I: Electronic Components and Technology Conference (ECTC), 2013 IEEE 63rd, 28-31 May 2013, Las Vegas, NV. IEEE conference proceedings 2013 ISBN 978-1-4799-0233-0. s. 510-516
USN Untitled
 
2012
38 Daiyan, Hamid; Andreassen, Erik; Grytten, Frode; Osnes, Harald; Gaarder, Rune Harald.
Shear Testing of Polypropylene Materials Analysed by Digital Image Correlation and Numerical Simulations. Experimental mechanics 2012 ;Volum 52.(9) s. 1355-1369
USN NORUTNA SINTEF UiO Untitled
 
39 Daiyan, Hamid; Grytten, Frode; Andreassen, Erik; Osnes, Harald; Lyngstad, Ole Vidar.
Numerical simulation of low-velocity impact loading of a ductile polymer material. Materials & Design 2012 ;Volum 42. s. 450-458
SINTEF UiO Untitled
 
40 Granlund, Håvard; Fløystad, Jostein Bø; Bakken, Eirik Torbjørn; Vullum, Per Erik; Andreassen, Erik; Breiby, Dag Werner.
Mapping of Lamellar Ordering in Injection-Molded Polypropylene. Norwegian PhD Network on Nanotechnology for Microsystems; 2012-06-11 - 2012-06-13
USN NTNU SINTEF Untitled
 
41 Granlund, Håvard; Fløystad, Jostein Bø; Esmaeili, Morteza; Bakken, Eirik Torbjørn; Vullum, Per Erik; Andreassen, Erik; Breiby, Dag Werner.
Mapping Structural Gradients in Injection-Molded Polypropylene. Norwegian Synchrotron and Neutron User Meeting 2012; 2012-01-30 - 2012-01-31
NTNU SINTEF Untitled
 
42 Nguyen, Hoang Vu; Kristiansen, Helge; Johannessen, Rolf; Andreassen, Erik; Hoivik, Nils; Aasmundtveit, Knut E..
Isotropic conductive adhesive filled with metal-coated polymer spheres – Effects of metal coating on rheological and mechanical properties. I: 4th Electronics System-Integration Technology Conference (ESTC 2012). IEEE conference proceedings 2012 ISBN 978-1-4673-4645-0. s. -
USN SINTEF Untitled
 
2011
43 Andreassen, Erik; Daiyan, Hamid; Grytten, Frode; Lyngstad, Ole Vidar; Osnes, Harald.
Material modelling for simulating impact loading of injection-moulded polypropylene parts. EUROTEC 2011; 2011-11-14 - 2011-11-15
SINTEF UiO Untitled
 
44 Daiyan, Hamid; Grytten, Frode; Andreassen, Erik; Gaarder, Rune Harald; Osnes, Harald.
Mechanical testing of polypropylene materials in shear analysed by digital image correlation. EUROTEC 2011; 2011-11-14 - 2011-11-15
SINTEF UiO Untitled
 
45 Andreassen, Erik.
Noen metoder for testing og analyse av plastmaterialer – med eksempler. Invitert foredrag på workshop arrangert av Plastnett Innlandet; 2011-06-28 - 2011-06-28
SINTEF Untitled
 
46 Nguyen, Hoang Vu; Kristiansen, Helge; Johannessen, Rolf; Andreassen, Erik; Hoivik, Nils; Aasmundtveit, Knut E.; Larsson, Andreas.
Temperature dependence of mechanical properties of isotropic conductive adhesive filled with metal coated polymer spheres. Electronic Components and Technology 2011 s. 639-644
USN SINTEF Untitled
 
47 Tran, Thanh-Nam; Larsson, Andreas; Andreassen, Erik; Aasmundtveit, Knut E.; Seeberg, Trine Margrethe.
Smart textiles - encapsulation of sensors. I: MME 2011: Proceedings of the 22nd Micromechanics and microsystems technology Europe workshop: 19-22 June 2011 Tønsberg, Norway. Tønsberg: Vestfold University College 2011 ISBN 978-82-7860-224-9. s. 130-133
USN SINTEF Untitled
 
2010
48 Andreassen, Erik.
Micro- and nano-structured polymer components. Invited lecture at the Institute of Micro- and Nano System Technology, Vestfold University College; 2010-05-26 - 2010-05-26
SINTEF Untitled
 
49 Andreassen, Erik.
Micro- and nano-structured polymer components fabricated by injection moulding. NTNU Nanolab; 2010-11-09 - 2010-11-09
SINTEF Untitled
 
50 Andreassen, Erik.
Micro- and nano-structured polymer components fabricated by injection moulding. NTNU NanoLab; 2010-11-09 - 2010-11-09
SINTEF Untitled
 
    Vis neste liste