Current Research Information SysTem In Norway
 
 

 Norsk versjon


 
Mainpage
Research results/NVI
Researchers
Projects
Research units
Log in
About Cristin
 
 
   
Back to search     Short format     Full format    
Export to


Showing results 1-27 of 27

2023
1 Noorsumar, Gulshan.
Modeling, Simulation and Prediction of Vehicle Crashworthiness in Full Frontal Impact. : University of Agder 2023 (ISBN 978-82-8427-113-2) Doctoral dissertations at University of Agder(400)
UIA Untitled
 
2 Noorsumar, Gulshan; Rogovchenko, Svitlana; Robbersmyr, Kjell Gunnar; Vysochinskiy, Dmitry; Klausen, Andreas.
Development and Extended Validation of a Lumped Parameter Prediction Model for Analysing Injury Parameters in a Vehicle Crash. I: Simulation and Modeling Methodologies, Technologies and Applications. SIMULTECH 2021. Springer 2023 ISBN 978-3-031-23149-0.
UIA Untitled
 
3 Noorsumar, Gulshan; Rogovchenko, Svitlana; Vysochinskiy, Dmitry; Robbersmyr, Kjell Gunnar.
A Numerical Comparison of Lagrange and Kane’s Method for Modeling and Crashworthiness Assessment of a Modified Vehicle. I: Simulation and Modeling Methodologies, Technologies and Applications. SIMULTECH 2022. Springer 2023 ISBN 978-3-031-43823-3. p. 156-176
UIA Untitled
 
2022
4 Mahdavipour, Mohammad Ali; Vysochinskiy, Dmitry.
Developing Fracture-Based Fragility Curves for Steel Components in Corrosive Environments. Journal of Structural Engineering 2022 ;Volume 148.(4)
UIA Untitled
 
5 Mahdavipour, Mohammad Ali; Vysochinskiy, Dmitry.
Micromechanical Modeling of Corroded Steel Joints under Excessive Plastic Deformations. Journal of performance of constructed facilities 2022 ;Volume 36.(2)
UIA Untitled
 
6 Mahdavipour, Mohammad Ali.
Failure prediction of steel components under the coupled effect of excessive plastic deformations and pitting corrosion. Kristiansand: University of Agder 2022 (ISBN 978-82-8427-073-9) 234 p. Doctoral dissertations at University of Agder(362)
UIA Untitled
 
7 Noorsumar, Gulshan; Robbersmyr, Kjell Gunnar; Rogovchenko, Svitlana; Vysochinskiy, Dmitry.
An Overview of Data Based Predictive Modeling Techniques Used in Analysis of Vehicle Crash Severity. I: Intelligent Technologies and Applications: 4th International Conference, INTAP 2021, Grimstad, Norway, October 11–13, 2021, Revised Selected Papers. Springer 2022 ISBN 978-3-031-10524-1. p. 355-379
UIA Untitled
 
8 Noorsumar, Gulshan; Rogovchenko, Svitlana; Robbersmyr, Kjell Gunnar; Vysochinskiy, Dmitry.
Vehicle crashworthiness performance in frontal impact: Mathematical model using elastic pendulum. Mechanics research communications 2022 ;Volume 124. p. -
UIA Untitled
 
9 Noorsumar, Gulshan; Rogovchenko, Svitlana; Vysochinskiy, Dmitry; Robbersmyr, Kjell Gunnar.
Modeling of Modified Vehicle Crashworthiness using a Double Compound Pendulum. I: Proceedings of the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. SciTePress 2022 ISBN 978-989-758-578-4. p. 102-111
UIA Untitled
 
10 Vysochinskiy, Dmitry; Akhtar, Naureen.
On the Influence of Cross-Section Size on Measured Strength of SLM-Produced AlSi10Mg-Alloy. Key Engineering Materials 2022 ;Volume 926. p. 132-140
UIA Untitled
 
2021
11 Noorsumar, Gulshan; Rogovchenko, Svitlana; Robbersmyr, Kjell Gunnar; Vysochinskiy, Dmitry; Klausen, Andreas.
A Novel Technique for Modeling Vehicle Crash using Lumped Parameter Models. I: 11th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2021). SciTePress 2021 ISBN 978-989-758-528-9. p. 62-70
UIA Untitled
 
12 Noorsumar, Gulshan; Robbersmyr, Kjell Gunnar; Rogovchenko, Svitlana; Vysochinskiy, Dmitry.
An overview of Data Based Predictive Modeling Techniques used in Analysis of Vehicle Crash Severity. 4th International Conference on Intelligent Technologies and Applications INTAP 2021; 2021-10-11 - 2021-10-13
UIA Untitled
 
13 Noorsumar, Gulshan; Rogovchenko, Svitlana; Robbersmyr, Kjell Gunnar; Vysochinskiy, Dmitry.
Mathematical models for assessment of vehicle crashworthiness: a review. International Journal of Crashworthiness 2021 p. -
UIA Untitled
 
14 Noorsumar, Gulshan; Rogovchenko, Svitlana; Robbersmyr, Kjell Gunnar; Vysochinskiy, Dmitry; Klausen, Andreas.
A Novel Technique for Modeling Vehicle Crash using Lumped Parameter Models. Proceedings of the 11th International Conference on Simulation and Modeling Methodologies, Technologies and Applications; 2021-07-07 - 2021-07-09
UIA Untitled
 
15 Noorsumar, Gulshan; Vysochinskiy, Dmitry; Englund, Even; Robbersmyr, Kjell Gunnar; Rogovchenko, Svitlana.
Effect of welding and heat treatment on the properties of UHSS used in automotive industry. The European Physical Journal Conferences 2021 ;Volume 250.
UIA Untitled
 
16 Vysochinskiy, Dmitry; Akhtar, Naureen; Nordmo, Tord; Strand, Mathias Rabjerg; Vyssios, Adrian; Bak, Morten Kollerup.
Experimental investigation of effect of printing direction and surface roughness on the mechanical properties of AlSi10Mg-alloy produced by selective laser melting. ESAFORM 2021 2021
UIA Untitled
 
2020
17 Noorsumar, Gulshan; Robbersmyr, Kjell Gunnar; Rogovchenko, Svitlana; Vysochinskiy, Dmitry.
Crash Response of a Repaired Vehicle-Influence of Welding UHSS Members. SAE technical paper series 2020 ;Volume 1- 2020.(April) p. 1-5
UIA Untitled
 
18 Mahdavipour, Mohammad Ali; Vysochinskiy, Dmitry.
Effect of the Joint Strength on the Performance of Ordinary Moment-resisting Frames Under a Progressive Collapse Situation. I: EURODYN 2020: Proceedings of the XI International Conference on Structural Dynamics. : European Association for Structural Dynamics 2020 ISBN 978-618-85072-2-7. p. 3995-4006
UIA Untitled
 
19 Vysochinskiy, Dmitry; Rybakov, Dmitri.
On the Effect of Various Heat Treatments on Microstructure of AISI 4130 Steel Used in Sour Service Pipes. I: ASME 2020 39th International Conference on Ocean, Offshore and Arctic Engineering - Volume 3: Materials Technology. The American Society of Mechanical Engineers (ASME) 2020 ISBN 978-0-7918-8434-8. p. -
UIA Untitled
 
2019
20 Mahdavipour, Mohammad Ali; Ding, songxiong; Vysochinskiy, Dmitry.
Performance of welded flange plate joints between steel beams and box columns without continuity plates. I: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications. CRC Press 2019 ISBN 9780429426506. p. 1179-1183
UIA Untitled
 
21 Stave, Daniel Årrestad; Schlanbusch, Rune; Vysochinskiy, Dmitry; Grasmo, Geir.
Condition Monitoring of Steel Wire Ropes. I: Exploring Opportunities - Synthetic/Steel - Proceedings of the OIPEEC Conference 2019. : OIPEEC 2019 ISBN 978-1-7336004-0-8.
NORCE UIA Untitled
 
2018
22 Munyazikwiye, Bernard; Vysochinskiy, Dmitry; Kdadyko, Mikhail; Robbersmyr, Kjell Gunnar.
Prediction of Vehicle Crashworthiness Parameters Using Piecewise Lumped Parameters and Finite Element Models. Designs 2018 ;Volume 2. p. -
NTNU UIA Untitled
 
2017
23 Vysochinskiy, Dmitry; Coudert, Térence; Hopperstad, Odd Sture; Lademo, Odd-Geir; Reyes, Aase Gavina Roberg.
Experimental study on the formability of AA6016 sheets pre-strained by rolling. International Journal of Material Forming 2017 p. 1-17
NTNU SINTEF Untitled
 
2016
24 Vysochinskiy, Dmitry; Coudert, Térence; Hopperstad, Odd Sture; Lademo, Odd-Geir; Reyes, Aase Gavina Roberg.
Experimental detection of forming limit strains on samples with multiple local necks. Journal of Materials Processing Technology 2016 ;Volume 227. p. 216-226
NTNU SINTEF Untitled
 
2014
25 Vysochinskiy, Dmitry; Coudert, Térence; Hopperstad, Odd Sture; Lademo, Odd-Geir; Reyes, Aase Gavina Roberg.
Experimental detection of the onset of local necking in an aluminium sheet. Materials Science Forum 2014 ;Volume 794-796. p. 590-595
SINTEF NTNU Untitled
 
2013
26 Gruben, Gaute; Vysochinskiy, Dmitry; Coudert, Térence; Reyes, Aase Gavina Roberg; Lademo, Odd-Geir.
Determination of Ductile Fracture Parameters of a Dual-Phase Steel by Optical Measurements. Strain 2013 ;Volume 49.(3) p. 221-232
NTNU SINTEF Untitled
 
2012
27 Vysochinskiy, Dmitry; Coudert, Térence; Reyes, Aase Gavina Roberg; Lademo, Odd-Geir.
Determination of forming limit strains using Marciniak-Kuczynski tests and automated digital image correlation procedures. Key Engineering Materials 2012 ;Volume 504-506. p. 17-22
NTNU SINTEF Untitled