Current Research Information SysTem In Norway
 
 

 Norsk versjon


 
Mainpage
Research results/NVI
Researchers
Projects
Research units
Log in
About Cristin
 
 
   
Back to search     Short format     Full format    
Export to


Showing results 1-50 of 59 << Previous 1 2    Next >>

2019
1 Zhang, Qunli; Luan, Xi; Dhawan, Saksham; Politis, Denis J; Du, Qiang; Fu, Ming Wang; Wang, Kehuan; Gharbi, Mohammad M; Wang, Liliang.
Development of the post-form strength prediction model for a highstrength 6xxx aluminium alloy with pre-existing precipitates and residual dislocations. International journal of plasticity 2019 ;Volume 119. p. 230-248
SINTEF Untitled
 
2018
2 Du, Qiang; Jia, Lina; Tang, Kai; Holmedal, Bjørn.
Modelling and experimental validation of microstructure evolution during the cooling stage of homogenization heat treatment of Al-Mg-Si alloys. Materialia 2018 ;Volume 4. p. 70-80
NTNU SINTEF Untitled
 
3 Ellingsen, Kjerstin; Du, Qiang; M'hamdi, Mohammed; Gihleengen, Britt Elin; Ledal, R.; Tveito, Knut Omdal; Hakonsen, A..
Experimental Study and Numerical Analysis of Cracking During DC Casting of Large Dimension 7075 Aluminium Billets. The Minerals, Metals & Materials Series 2018 ;Volume Part F4. p. 895-900
SINTEF Untitled
 
4 Jin, Min; Miao, Naihua; Zhao, Wenyue; Zhou, Jian; Du, Qiang; Sun, Zhimei.
Structural stability and mechanical properties of Co3(Al, M) (M = Ti, V, Cr, Zr, Nb, Mo, Hf, Ta, W) compounds. Computational materials science 2018 ;Volume 148. p. 27-37
SINTEF Untitled
 
5 Li, Hongxiang; Wang, Jian; Yang, Changlin; Xie, Chen; Du, Qiang; Zhang, Jishan.
Interfacial characteristics of Zn/AZ31/Zn clad sheets fabricated by hot roll-bonding and annealing. Materials Science and Technology 2018 ;Volume 34.(18) p. 2260-2270
SINTEF Untitled
 
6 Li, Yue; Holmedal, Bjørn; Li, Hongxiang; Zhuang, Linzhong; Zhang, Jishan; Du, Qiang.
Precipitation and strengthening modeling for disk-shaped particles in aluminum alloys: Size distribution considered. Materialia 2018 ;Volume 4. p. 431-443
NTNU SINTEF Untitled
 
7 Liu, C.L.; Du, Qiang; Parson, Nick C.; Poole, Warren J..
The interaction between Mn and Fe on the precipitation of Mn/Fe dispersoids in Al-Mg-Si-Mn-Fe alloys. Scripta Materialia 2018 ;Volume 152. p. 59-63
SINTEF Untitled
 
8 Shi, Chenying; Du, Yong; Hu, Biao; Yang, Biaobiao; Pan, Yafei; Guo, Fangyu; Liu, Shuhong; Du, Qiang.
Thermodynamic descriptions of the Ag-X (X=S, As, Lu) systems. Calphad 2018 ;Volume 62. p. 207-214
SINTEF Untitled
 
9 Tang, Kai; Du, Qiang; Li, Yanjun.
Modelling microstructure evolution during casting, homogenization and ageing heat treatment of Al-Mg-Si-Cu-Fe-Mn alloys. Calphad 2018 ;Volume 63. p. 164-184
NTNU SINTEF Untitled
 
2017
10 Andersen, Sigmund Jarle; Marioara, Calin Daniel; Friis, Jesper; Bjørge, Ruben; Du, Qiang; Ringdalen, Inga Gudem; Wenner, Sigurd; Mørtsell, Eva Anne; Holmestad, Randi; Saito, Takeshi; Røyset, Jostein; Reiso, Oddvin.
Directionality and Column Arrangement Principles of Precipitates in Al-Mg-Si-(Cu) and Al-Mg-Cu Linked to Line Defect in Al. I: The 15th International Conference on Aluminium Alloys. Trans Tech Publications 2017 ISBN 978-3-0357-1050-2. p. 461-470
NTNU SINTEF Untitled
 
11 Andersen, Sigmund Jarle; Marioara, Calin Daniel; Friis, Jesper; Bjørge, Ruben; Du, Qiang; Ringdalen, Inga Gudem; Wenner, Sigurd; Mørtsell, Eva Anne; Holmestad, Randi; Saito, Takeshi; Røyset, Jostein; Reiso, Oddvin.
Directionality and column arrangement principles of precipitates in Al-Mg-Si-(Cu) and Al-Mg-Cu linked to line defect in Al. Materials Science Forum 2017 ;Volume 877. p. 461-470
NTNU SINTEF Untitled
 
12 Du, Qiang; Tang, Kai; Marioara, Calin Daniel; Andersen, Sigmund Jarle; Holmedal, Bjørn; Holmestad, Randi.
Modeling over-ageing in Al-Mg-Si alloys by a multi-phase CALPHAD-coupled Kampmann-Wagner Numerical model. Acta Materialia 2017 ;Volume 122. p. 178-186
NTNU SINTEF Untitled
 
13 Li, Hongxiang; Bai, Qingling; Li, Yue; Du, Qiang; Katgerman, Laurens; Zhang, Jishan; Zhuang, Linzhong.
Mechanical properties and cold cracking evaluations of four 7xxx series aluminum alloys using a newly developed index. Materials Science & Engineering: A 2017 ;Volume 698. p. 230-237
SINTEF Untitled
 
14 Li, Hong-Xiang; Nie, Xin-Yu; He, Zan-bing; Zhao, Kang-Ning; Du, Qiang; Zhang, Ji-Shan; Zhuang, Lin-Zhong.
Interfacial microstructure and mechanical properties of Ti−6Al−4V/Al7050 joints fabricated using the insert molding method. International Journal of Minerals, Metallurgy and Materials 2017 ;Volume 24.(12) p. 1412-1423
SINTEF Untitled
 
15 Li, Yue; Gao, X; Zhang, ZR; Xiao, WL; Li, Hongxiang; Du, Qiang; Katgerman, L.; Zhang, Jishan; Zhuang, Linzhong.
Experimental and Theoretical Studies of the Hot Tearing Behavior of Al-xZn-2Mg-2Cu Alloys. Metallurgical and Materials Transactions A 2017 ;Volume 48.(10) p. 4744-4754
SINTEF Untitled
 
16 Liu, C.L.; Azizi-Alizamini, Hamid; Parson, Nick C.; Poole, Warren J.; Du, Qiang.
Microstructure evolution during homogenization of Al-Mg-Si-Mn-Fe alloys: Modelling and experimental results. Transactions of Nonferrous Metals Society of China 2017 ;Volume 27.(4) p. 747-753
SINTEF Untitled
 
17 Xu, Yijiang; Casari, Daniele; Du, Qiang; Mathiesen, Ragnvald; Arnberg, Lars; Li, Yanjun.
Heterogeneous nucleation and grain growth of inoculated aluminium alloys: An integrated study by in-situ X-radiography and numerical modelling. Acta Materialia 2017 ;Volume 140. p. 224-239
NTNU SINTEF Untitled
 
18 Zhao, Kangning; Li, Hongxiang; Luo, Jinru; Liu, Y.J.; Du, Qiang; Zhang, Jishan.
Interfacial bonding mechanism and mechanical properties of novel AZ31/WE43 bimetal composites fabricated by insert molding method. Journal of Alloys and Compounds 2017 ;Volume 729. p. 344-353
SINTEF Untitled
 
2016
19 Bai, Qingling; Li, Hong-Xiang; Du, Qiang; Zhang, Ji-Shan; Zhuang, Lin-Zhong.
Mechanical properties and constitutive behaviors of as-cast 7050 aluminum alloy from room temperature to above the solidus temperature. International Journal of Minerals, Metallurgy and Materials 2016 ;Volume 23.(8) p. 949-958
SINTEF Untitled
 
20 Bai, Qingling; Li, Yue; Li, Hongxiang; Du, Qiang; Zhang, Jishan; Zhuang, Linzhong.
Roles of alloy composition and grain refinement on hot tearing susceptibility of 7xxx aluminum alloys. Metallurgical and Materials Transactions A 2016 ;Volume 47.(8) p. 4080-4091
SINTEF Untitled
 
21 Bai, QL; Liu, JC; Li, H.X.; Du, Qiang; Katgerman, Laurens; Zhang, JS; Zhuang, LZ.
A modified hot tearing criterion for direct chill casting of aluminium alloys. Materials Science and Technology 2016 ;Volume 32.(8) p. 846-854
SINTEF Untitled
 
22 Du, Qiang; Tang, Kai; Marioara, Calin Daniel; Andersen, Sigmund Jarle; Holmedal, Bjørn; Holmestad, Randi.
Modeling over-ageing in Al-Mg-Si alloys by a multi-phase CALPHAD-coupled Kampmann-Wagner Numerical model. The 15th International Conference on Aluminum Alloys (ICAA15); 2016-06-12 - 2016-06-16
NTNU SINTEF Untitled
 
23 Gouttebroze, Sylvain; Du, Qiang; M'hamdi, Mohammed.
Sistruc: A microstructure model for optimization of silicon materials. Silicon for the Chemical and Solar Industry XIII; 2016-06-14 - 2016-06-16
NTNU SINTEF Untitled
 
24 Jia, Lina; Zhang, H; Tang, Kai; Du, Qiang; Onsøien, Morten Ingar; Holmedal, Bjørn.
Modelling of precipitation during cooling stage of homogenization heat treatment of Al-Mg-Si alloys. The 15th International Conference on Aluminum Alloys (ICAA15); 2016-06-12 - 2016-06-16
NTNU SINTEF Untitled
 
25 Li, Yue; Bai, Qingling; Liu, Jie; Li, Hongxiang; Du, Qiang; Zhang, Jishan; Zhuang, Linzhong.
The Influences of Grain Size and Morphology on the Hot Tearing Susceptibility, Contraction, and Load Behaviors of AA7050 Alloy Inoculated with Al-5Ti-1B Master Alloy. Metallurgical and Materials Transactions A 2016 ;Volume 47.(8) p. 4024-4037
SINTEF Untitled
 
26 Liu, chenglu; Azizi-Alizamini, Hamid; Parson, Nick; Poole, Warren; Du, Qiang.
Microstructure evolution during homogenization of Al-Mg-Si-Mn-Fe alloys: Modelling and experimental results. the 15th International Conference on Aluminum Alloys; 2016-12-06 - 2017-04-06
SINTEF Untitled
 
27 Zhao, Kangning; Liu, Juncheng; Nie, Xinyu; Li, Yue; Li, Hongxiang; Du, Qiang; Zhuang, Linzhong; Zhang, Jishan.
Interface formation in magnesium-magnesium bimetal composites fabricated by insert molding method. Materials & design 2016 ;Volume 91. p. 122-131
SINTEF Untitled
 
2015
28 Bai, Qingling; Liu, Juncheng; Li, Yue; Li, Hongxiang; Du, Qiang; Zhang, Jishan; Zhuang, Linzhong.
Hot tearing evaluation and contraction behaviors of four AA7xxx alloys. Materials Science Forum 2015 ;Volume 817. p. 21-26
SINTEF Untitled
 
29 Du, Qiang; Holmedal, Bjørn; Friis, Jesper; Marioara, Calin Daniel.
Precipitation of Non-spherical Particles in Aluminum Alloys Part II: Numerical Simulation and Experimental Characterization During Aging Treatment of an Al-Mg-Si Alloy. Metallurgical and Materials Transactions A 2015
NTNU SINTEF Untitled
 
30 Du, Qiang; Li, Yanjun.
Prediction of as-cast grain size of inoculated aluminum alloys melt solidified under non-isothermal conditions. IOP Conference Series: Materials Science and Engineering 2015 ;Volume 84.(1)
NTNU SINTEF Untitled
 
31 Holmedal, Bjørn; Osmundsen, Elisa; Du, Qiang.
Precipitation of Non-Spherical Particles in Aluminum Alloys Part I: Generalization of the Kampmann–Wagner Numerical Model. Metallurgical and Materials Transactions A 2015
NTNU SINTEF Untitled
 
32 Li, Yanjun; Xu, Yijiang; Du, Qiang; Arnberg, Lars; Mathiesen, Ragnvald.
Numerical modelling and in-situ radiographic study of the grain nucleation and growth of inoculated aluminum alloys. IOP Conference Series: Materials Science and Engineering 2015 ;Volume 84.(1)
NTNU SINTEF Untitled
 
33 Liu, Juncheng; Hu, J.; Nie, Xinyu; Li, Hongxiang; Du, Qiang; Zhang, Jishan; Zhuang, Linzhong.
The interface bonding mechanism and related mechanical properties of Mg/Al compound materials fabricated by insert molding. Materials Science & Engineering: A 2015 ;Volume 635. p. 70-76
SINTEF Untitled
 
34 Nie, Xinyu; Zhao, Kangning; Li, Hongxiang; Du, Qiang; Zhang, Jishan; Zhuang, Linzhong.
Comparisons of interface microstructure and mechanical behavior between Ti/Al and Ti-6Al-4V/Al bimetallic composites. China Foundry 2015 ;Volume 12.(1) p. 1-8
SINTEF Untitled
 
35 Qi, Xin Bo; Chen, Yun; Kang, Xiu Hong; Li, Dian Zhong; Du, Qiang.
An analytical approach for predicting as-cast grain size of inoculated aluminum alloys. Acta Materialia 2015 ;Volume 99. p. 337-346
SINTEF Untitled
 
36 Tang, Kai; Du, Qiang; Ma, Xiang; Liu, Z-K.
Grain Boundary Segregation of Copper Impurity in Bicrystal Silicon. 1st International Conference on Computational Design and Simulation of Materials; 2015-08-17 - 2015-08-20
SINTEF Untitled
 
37 Xu, Yijiang; Du, Qiang; Li, Yanjun.
Influence of Dendritic Growth of Equiaxed Grains on As-Cast Grain Size Prediction of Inoculated Aluminum Alloys. Transactions of the Indian Institute of Metals 2015 ;Volume 68.(6) p. 1013-1016
NTNU SINTEF Untitled
 
2014
38 Bai, qinglin; Li, Hongxiang; Du, Qiang; Zhang, Jishan; Zhuang, Linzhong.
Mechanical properties and constitutive behavior of as-cast high strength AA7xxx alloys below solidus temperature. Materials Science Forum 2014 ;Volume 794-796. p. 467-472
SINTEF Untitled
 
39 Bai, qinglin; Liu, J.C.; Li, Y.; Li, Hongxiang; Du, Qiang; Zhang, Jishan; Zhuang, Linzhong.
Hot tearing evaluation and contraction behaviors of four AA7xxx alloys. Chinese Materials Annual Meeting; 2014-07-04 - 2014-07-07
SINTEF Untitled
 
40 Du, Qiang; Friis, Jesper.
Modeling precipitate growth in multicomponent alloy systems by a variational principle. Acta Materialia 2014 ;Volume 64. p. 411-418
SINTEF Untitled
 
41 Du, Qiang; Li, Yanjun.
An extension of the Kampmann-Wagner numerical model towards as-cast grain size prediction of multicomponent aluminum alloys. Acta Materialia 2014 ;Volume 71. p. 380-389
SINTEF Untitled
 
42 Du, Qiang; Li, Yanjun.
Effect modeling of Cr and Zn on microstructure evolution during homogenization heat treatment of AA3xxx alloys. Transactions of Nonferrous Metals Society of China 2014 ;Volume 24.(7) p. 2145-2149
NTNU SINTEF Untitled
 
43 Du, Qiang; Li, Yanjun.
Prediction of as-cast grain size of inoculated multicomponent aluminum alloys solidified under non-isothermal condition. the 14th International Conference on Aluminium Alloys; 2014-06-15 - 2014-06-19
NTNU SINTEF Untitled
 
44 Du, Qiang; Li, Yanjun.
Prediction of as-cast grain size of inoculated multicomponent aluminum alloys. Materials Science Forum 2014 ;Volume 790-791. p. 185-190
NTNU SINTEF Untitled
 
45 Du, Qiang; Marioara, Calin Daniel; Friis, Jesper; Osmundsen, Elisa; Holmedal, Bjørn.
Modelling precipitation of non-spherical and metastable particles in multicomponent aluminium alloys. The 14th International Conference on Aluminum Alloys (ICAA14); 2014-06-15 - 2014-06-19
NTNU SINTEF Untitled
 
46 Du, Qiang; Tang, Kai; Yanjun, Li.
As cast grain size prediction via CALPHAD and CALPHAD-coupled kinetic approaches. the forty-third CALPHAD International Conference; 2014-06-01 - 2014-06-06
SINTEF Untitled
 
47 Li, Yanjun; Du, Qiang.
Predicting the As-Cast Grain Size of Inoculated Aluminium Alloys. the 4th International Conference on Advances in Solidification Processes; 2014-07-08 - 2014-07-11
NTNU SINTEF Untitled
 
48 Li, Yanjun; Du, Qiang.
Addressing the influence of solute diffusion layer in solidification front in as-cast grain size prediction models. Materials Science Forum 2014 ;Volume 790-791. p. 179-184
NTNU SINTEF Untitled
 
49 Nie, X.Y.; Liu, J.C.; Li, Hongxiang; Du, Qiang; Zhang, Jishan; Zhuang, Linzhong.
An investigation on bonding mechanism and mechanical properties of Al/Ti compound materials prepared by insert moulding. Materials & design 2014 ;Volume 63. p. 142-150
SINTEF Untitled
 
2013
50 Du, Qiang; Friis, Jesper.
Modelling precipitation kinetics during aging of Al-Mg-Si alloys. the 2rd world Congress on Integrated Computational Materials Engineering; 2013-07-07 - 2013-07-11
SINTEF Untitled
 
    Show next list