|
|||||||||||||||
|
In order to register data in Cristin, you must be an academic or administrative employee.
|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
2024
|
||
| 1. | Han, F.; Luo, X.; Liu, Q.; Hou, Z.; Marthinsen, Knut; Wu, G.L.; Hatzoglou, Constantinos; Kontis, Paraskevas; Huang, X.. The effect of grain size and rolling reduction on microstructure evolution and annealing hardening response of a Mg-3Gd alloy. Journal of Magnesium and Alloys 2024 p. - NTNU |
|
|
|
||
| 2. | Han, Fang; Luo, Xuan; Marthinsen, Knut; Wu, Guilin; Hou, Ziyong; Huang, Xiaoxu. Effect of initial grain size on the recrystallization behavior and recrystallization texture of a Mg–3Gd alloy. Journal of Materials Science & Technology 2024 ;Volume 188. p. 169-182 NTNU |
|
|
|
||
| 3. | Hennum, Endre Asheim; Marthinsen, Knut; Tundal, Ulf H.. Effect of Microstructure on the Precipitation of β-Mg<inf>2</inf>Si during Cooling after Homogenisation of Al-Mg-Si Alloys. Metals 2024 ;Volume 14.(2) p. - NTNU |
|
|
|
||
| 4. | Hennum, Endre Asheim; Marthinsen, Knut; Tundal, Ulf Håkon. Effect of Microstructure on the Precipitation of β-Mg2Si during Cooling after Homogenisation of Al-Mg-Si Alloys. Metals 2024 ;Volume 14. p. - NTNU |
|
|
|
||
| 5. | Wang, Yaping; Fagermo, Moa; Furu, Trond; Justnes, Harald; Marthinsen, Knut. Compatibility of Different Aluminium with a New Environmental-Friendly Concrete. Advances in Science and Technology 2024 ;Volume 145. p. 97-104- SINTEF NTNU |
|
|
|
||
| 6. | Ånes, Håkon Wiik; Hjelen, Jarle; Van Helvoort, Antonius Theodorus Johannes; Marthinsen, Knut. kikuchipy: an open-source software for analysis of EBSD patterns. Australian Microbeam Analysis Society XVI; 2024-02-05 - 2024-02-09 NTNU |
|
|
2023
|
||
| 7. | Imani Aria, Arash; Manik, Tomas; Holmedal, Bjørn; Marthinsen, Knut. A computational study on efficient yield surface calibrations using a crystal plasticity spectral solver. Multiscale and Multidisciplinary Modeling, Experiments and Design 2023 p. - NTNU |
|
|
|
||
| 8. | Imani Aria, Arash; Manik, Tomas; Holmedal, Bjørn; Marthinsen, Knut. An efficient crystal plasticity virtual laboratory for investigating mechanical anisotropy of metallic alloys. 5th International Conference on Light Materials - Science and Technology; 2023-06-21 - 2023-06-23 NTNU |
|
|
|
||
| 9. | Marthinsen, Knut. Alloy and process development through advanced characterization and modelling (mainly related to aluminium). Seminar; 2023-04-12 - 2023-04-12 NTNU |
|
|
|
||
| 10. | Marthinsen, Knut. Aluminium alloy and process development through advanced characterization and multi-scale modelling. Examples of recent and current activities at NTNU, Norway. Invited guest lecture; 2023-10-10 NTNU |
|
|
|
||
| 11. | Marthinsen, Knut. Aluminium alloy technology: Alloys and Products, Thermo-mechanical processing, and Microstructure and Properties. CAMRIC Global Engineering lecture; 2023-11-10 NTNU |
|
|
|
||
| 12. | Marthinsen, Knut. Texture and Crystal Plasticity (CP) modelling - from basics to advanced polycrystal (CP) modelling. Workshop; 2023-04-14 - 2023-05-15 NTNU |
|
|
|
||
| 13. | Marthinsen, Knut; Aria, Arash Imani; Holmedal, Bjørn; Manik, Tomas. A spectral crystal-plasticity solver for efficient calibration of anisotropic yield surfaces and studies of anelasticity in the elasto-plastic transition. 7th International Symposium on Advanced Structural Materials; 2023-11-04 - 2023-11-05 NTNU |
|
|
|
||
| 14. | Marthinsen, Knut; Aria, Arash Imani; Holmedal, Bjørn; Manik, Tomas. A spectral crystal-plasticity virtual laboratory for efficient calibration of anisotropic yield surfaces. The International Conference on the Physical Properties and Application of Advanced Materials (ICPMAT); 2023-10-24 NTNU |
|
|
|
||
| 15. | Marthinsen, Knut; Ånes, Håkon W.. Orientation mapping, and phase and particle analysis in SEM EBSD using Dictionary Indexing. 9th Forum of Center for Advanced Materials Research and International Collaboration online (CAMRIC-FORUM9),; 2023-11-15 NTNU |
|
|
|
||
| 16. | Marthinsen, Knut; Ånes, Håkon W.; Van Helvoort, Antonius. EBSD software development and its applications to phase and particle analysis. The Seventh Chinese-Norwegian Symposium on Light Metals and New Energy; 2023-10-07 - 2023-10-10 NTNU |
|
|
|
||
| 17. | Marthinsen, Knut; Ånes, Håkon Wiik; Van Helvoort, Antonius. Correlated subgrain and particle analysis in scanning electron microscopy and its influence on the recovery and recrystallization behaviour of an AlMn alloy. Thermec'2023; 2023-07-02 - 2023-07-07 NTNU |
|
|
|
||
| 18. | Marthinsen, Knut; Ånes, Håkon Wiik; Van Helvoort, Antonius. Orientation dependent Zener pinning of (sub)grains during recovery and recrystallization in an Al-Mn alloy. 8th Conference on Recrystallization and Grain Growth; 2023-05-15 - 2023-05-19 NTNU |
|
|
|
||
| 19. | Xu, Jianbin; Hopperstad, Odd Sture; Holmedal, Bjørn; Berstad, Torodd; Manik, Tomas; Marthinsen, Knut. On the spatio-temporal characteristics of the Portevin-Le Chatelier effect in aluminium alloy AA5182: An experimental and numerical study. International journal of plasticity 2023 ;Volume 169. NTNU |
|
|
|
||
| 20. | Xu, Jianbin; Hopperstad, Odd Sture; Holmedal, Bjørn; Manik, Tomas; Marthinsen, Knut. Experimental and numerical investigation on the spatio-temporal characteristics of the Portevin-le-Chatelier effect in an aluminium alloy. International Conference on Plasticity, Deformation & Fracture; 2023-01-03 - 2023-01-09 NTNU |
|
|
|
||
| 21. | Ånes, Håkon W.; Crout, Phillip; Cautaerts, Niels; MacArthur, Katherine E.; Prestat, Eric; Hjelen, Jarle; Van Helvoort, Antonius; Marthinsen, Knut. HyperSpy: open-source multidimensional analysis software for electron microscopy. EMAS 17; 2023-05-14 - 2023-05-18 NTNU |
|
|
|
||
| 22. | Ånes, Håkon W.; Crout, Phillip; Lervik, L.; Hastad, A; Natlandsmyr, Ole; Bergh, Tina; Hjelen, Jarle; Van Helvoort, Antonius; Marthinsen, Knut. kikuchipy: a toolbox for analysis of electron backscatter diffraction patterns. Open-Source Data Analysis Workshop at IUMAS-8; 2023-08-11 - 2023-08-15 NTNU |
|
|
|
||
| 23. | Ånes, Håkon W.; Crout, Phillip; Lervik, Lars Andreas Hastad; Natlandsmyr, Ole; Bergh, Tina; Hjelen, Jarle; van Helvoort, Antonius T. J.; Marthinsen, Knut. kikuchipy: a toolbox for analysis of electron backscatter diffraction patterns. Open-Source Data Analysis Workshop at IUMAS-8; 2023-08-11 - 2023-08-15 NTNU |
|
|
|
||
| 24. | Ånes, Håkon Wiik; Van Helvoort, Antonius; Marthinsen, Knut. Orientation dependent pinning of (sub)grains by dispersoids during recovery and recrystallization in an Al–Mn alloy. Acta Materialia 2023 ;Volume 248. p. - NTNU |
|
|
|
||
| 25. | Ånes, Håkon Wiik; Van Helvoort, Antonius; Marthinsen, Knut. Orientation dependent pinning of (sub)grains by dispersoids during recovery and recrystallization in an Al-Mn alloy. LightMat 20023; 2023-06-21 - 2023-06-23 NTNU |
|
|
2022
|
||
| 26. | Hennum, Endre Asheim; Marthinsen, Knut; Reiso, Oddvin; Tundal, Ulf Håkon. Modelling the -Mg2Si particle structure in Al-Mg-Si alloys.. International Conference on Aluminium Alloys (ICAA18); 2022-09-04 - 2022-09-08 NTNU |
|
|
|
||
| 27. | Marthinsen, Knut. Aluminium alloy and process development through advanced characterization and modelling. ICAA18 - 18th International Conference on Aluminium Alloys; 2022-09-04 - 2022-09-08 NTNU |
|
|
|
||
| 28. | Marthinsen, Knut. Aluminium alloy technology: Alloys and Products; Termo-mechanical processing; Microstructure and Properties. CAMRIC - Global Engineering Lecture; 2022-10-25 - 2022-10-25 NTNU |
|
|
|
||
| 29. | Marthinsen, Knut. Aluminium downstream processing - Alloys and Products - Termo-mechanical processing. Intpart CanAl International Summer School; 2022-06-14 - 2022-06-16 NTNU |
|
|
|
||
| 30. | Marthinsen, Knut. Aluminium Recycling - Opportunities and challenges. 8thForum of Center for Advanced Materials Research and International Collaboration online(CAMRIC-FORUM8),; 2022-10-25 - 2022-10-31 NTNU |
|
|
|
||
| 31. | Marthinsen, Knut. Recrystallization in the Control of Microstructure and Texture during thermomechanical processing (of mainly Al-alloys)– phenomenology, fundamentals & modelling. Lecture I. Invited guest lecture; 2022-12-08 - 2022-12-08 NTNU |
|
|
|
||
| 32. | Marthinsen, Knut. SFI PhysMet: Centre for Sustainable and Competitive Metallurgical and Manufacturing Industry. Nasjonal konferanse for materialteknologi 2022: Muligheter i det grønne skiftet; 2022-06-01 - 2022-06-02 NTNU |
|
|
|
||
| 33. | Marthinsen, Knut. SFI PhysMet - CENTRE FOR SUSTAINABLE AND COMPETITIVE METALLURGICAL AND MANUFACTURING INDUSTRY (2020 - 2028). Intpart CanAl International Summer School; 2022-06-14 - 2022-06-16 NTNU |
|
|
|
||
| 34. | Marthinsen, Knut; Ånes, Håkon Wiik; Huang, Ke; Van Helvoort, Antonius. Particle effects during recrystallization of aluminium alloys and their influence on the texture evolution. The 8th International Conference on Solid→Solid Phase Transformations in Inorganic Materials (PTM); 2022-06-27 - 2022-07-01 NTNU |
|
|
|
||
| 35. | Marthinsen, Knut; Ånes, Håkon Wiik; Van Helvoort, Antonius. Correlated sub-grain and particle analysis during recovery and recrystallization of an AlMn-alloy. The 6th International Symposium on Advanced Structural Materials 111-program symposium, Chongqing University 5-6. November 2022; 2022-11-05 - 2022-11-06 NTNU |
|
|
|
||
| 36. | Marthinsen, Knut; Ånes, Håkon Wiik; Van Helvoort, Antonius. Orientation dependent Zener-pinning of sub-grains during recovery and recrystallization of an Al-Mn alloy. The 16th International Conference on the Physical Properties and Application of Advanced Materials (ICPMAT); 2022-11-21 - 2022-11-23 NTNU |
|
|
|
||
| 37. | Thronsen, Elisabeth; Mørkeseth, Hanne; Marioara, Calin Daniel; Minakuchi, Kazuhiro; Katsumi, Tetsuya; Marthinsen, Knut; Matsuda, Kenji; Holmestad, Randi. The Effect of Small Additions of Fe and Heavy Deformation on the Precipitation in an Al–1.1Mg–0.5Cu–0.3Si At. Pct Alloy. Metallurgical and Materials Transactions A 2022 ;Volume 53.(9) p. 3296-3310 NTNU SINTEF |
|
|
|
||
| 38. | Thronsen, Elisabeth; Mørkeseth, Hanne; Marioara, Calin Daniel; Minakutchi, Kazuhiro; Katsumi, Tetsuya; Marthinsen, Knut; Matsuda, Kenji; Holmestad, Randi. Effects on precipitation from small Fe additions and heavy deformation in an Al-1.1 Mg-0.5 Cu-0.3 Si at% alloy. CAMRIC- FORUM8; 2022-10-25 - 2022-10-31 SINTEF NTNU |
|
|
|
||
| 39. | Xu, Jianbin; Holmedal, Bjørn; Hopperstad, Odd Sture; Manik, Tomas; Marthinsen, Knut. Dynamic strain ageing in an AlMg alloy at different strain rates and temperatures: Experiments and constitutive modelling. International journal of plasticity 2022 ;Volume 151. p. - NTNU |
|
|
|
||
| 40. | Xu, Jianbin; Liu, Lei; Hopperstad, Odd Sture; Holmedal, Bjørn; Manik, Tomas; Marthinsen, Knut. A simple method enabling efficient quantitative analysis of the Portevin–Le Chatelier band characteristics. Scripta Materialia 2022 ;Volume 222. p. - NTNU |
|
|
|
||
| 41. | Ånes, Håkon Wiik; Van Helvoort, Antonius; Marthinsen, Knut. Correlated subgrain and particle analysis of a recovered Al-Mn alloy by directly combining EBSD and backscatter electron imaging. Materials Characterization 2022 ;Volume 193. p. - NTNU |
|
|
2021
|
||
| 42. | Hennum, Endre Asheim; Marthinsen, Knut; Reiso, Oddvin; Tundal, Ulf. Nucleation and growth of beta-Mg2Si during cooling after homogenisation of Al-Mg-Si-alloys. 4th International Conference on Light Materials - Science and Technology; 2021-11-02 - 2021-11-04 NTNU |
|
|
|
||
| 43. | Hennum, Endre Asheim; Marthinsen, Knut; Reiso, Oddvin; Tundal, Ulf Håkon. Nucleation and growth of -Mg2Si during cooling after homogenisation.. LightMat 2021; 2021-11-02 - 2021-11-04 NTNU |
|
|
|
||
| 44. | Håland, Kari; Marthinsen, Knut; Dahl, Nina. Vil du kjøre en bil bygd av resirkulerte materialer. Adresseavisen 2021 NTNU SINTEF |
|
|
|
||
| 45. | Khalid, Muhammad Zeeshan; Friis, Jesper; Ninive, Per Harald; Marthinsen, Knut; Ringdalen, Inga Gudem; Strandlie, Are. First-principles study of tensile and shear strength of an Fe2Al5//Fe interface. Computational Materials Science 2021 ;Volume 192. p. - SINTEF NTNU |
|
|
|
||
| 46. | Khalid, Muhammad Zeeshan; Friis, Jesper; Ninive, Per Harald; Marthinsen, Knut; Ringdalen, Inga Gudem; Strandlie, Are. Modified embedded atom method potential for Fe-Al intermetallics mechanical strength: A comparative analysis of atomistic simulations. Physica. B, Condensed matter 2021 ;Volume 618. p. - NTNU SINTEF |
|
|
|
||
| 47. | Khalid, Muhammad Zeeshan; Friis, Jesper; Ninive, Per Harald; Marthinsen, Knut; Strandlie, Are. First-principles study of tensile and shear strength of Fe-Al and α-AlFeSi intermetallic compound interfaces. Computational Materials Science 2021 ;Volume 187:110058. p. 1-9 NTNU SINTEF |
|
|
|
||
| 48. | Manik, Tomas; Marthinsen, Knut; Zhang, Kai; Imani Aria, Arash; Holmedal, Bjørn. Deformation Texture Evolution in Flat Profile AlMgSi Extrusions: Experiments, FEM, and Crystal Plasticity Modeling. Frontiers in Materials 2021 ;Volume 8. p. - NTNU SINTEF |
|
|
|
||
| 49. | Marthinsen, Knut. Aluminium alloy and process development through advanced characterization and modelling. 7th Forum of Center for Advanced Materials Research and International Collaboration (CAMRIC-FORUM7); 2021-09-24 - 2021-10-08 NTNU |
|
|
|
||
| 50. | Marthinsen, Knut. Thermomechanical Processing of Aluminium Alloys, Microstructure, texture and properties. CAMRIC, Global Engineering Lecture; 2021-10-05 - 2021-10-05 NTNU |
|