Current Research Information SysTem In Norway
 
 

 Norsk versjon


 
Mainpage
Research results/NVI
Researchers
Projects
Research units
Log in
About Cristin
 
 
   
Back to search     Short format     Full format    
Export to


Showing results 1-50 of 376 << Previous 1 2 3 4 5 6 7 8    Next >>

2023
1 Chen, Yulin; Liu, Manping; Ding, Lipeng; Jia, Zhihong; Jia, Shuangfeng; Wang, Jianbo; Murashkin, Maxim; Valiev, Ruslan Z.; Roven, Hans Jørgen.
Atomic-scale inhomogeneous solute distribution in an ultrahigh strength nanocrystalline Al-8 Mg aluminum alloy. Materials Characterization 2023 ;Volume 198. p. -
NTNU Untitled
 
2 Liu, Manping; Ren, Xiao-Yu; Chen, Yu-Lin; Jia, Zhihong; Ding, Li-Peng; Roven, Hans Jørgen.
Microstructure, mechanical properties and precipitation evolution of nanocrystalline Al-Mg-Si-Cu aluminum alloy. Zhongguo Youse Jinshu Xuebao 2023 ;Volume 33.(6) p. 1695-1706
NTNU Untitled
 
3 Meng, Yunpeng; Lin, Boyu; Wang, Lifei; Fan, Jianfeng; Zhang, Shangzhou; Lu, Liwei; Roven, Hans Jørgen; Zhang, Hua.
Correction to: Effect of Extrusion Combination Types on Microstructure and Mechanical Properties of the AZ31/GW103K Bimetallic Composite Plates (Acta Metallurgica Sinica (English Letters), (2022), 35, 12, (1959-1972), 10.1007/s40195-022-01438-y). Acta Metallurgica Sinica (English Letters) 2023 p. -
NTNU Untitled
 
2022
4 Kirkbakk, Kjell Martin.
Aluminum weld metal inoculation by Ti/TiB2/TiC additions to screw extruded filler wires. Trondheim: NTNU Open 2022 113 p.
SINTEF NTNU Untitled
 
5 Lin, Boyu; Zhang, Hua; Meng, Yunpeng; Wang, Lifei; Fan, Jianfeng; Zhang, Shangzhou; Roven, Hans Jørgen.
Deformation behavior, microstructure evolution, and dynamic recrystallization mechanism of an AZ31 Mg alloy under high-throughput gradient thermal compression. Materials Science & Engineering: A 2022 ;Volume 847. p. -
NTNU Untitled
 
6 Liu, Zhibo; Lin, Yaojun; Yan, Zhigang; Liu, Manping; Liu, Xiaochun; Sun, Jiani; Roven, Hans Jørgen.
Achieving ultrahigh strength in binary Al-10Mg alloy through heavy cryogenic rolling. Journal of Alloys and Compounds 2022 ;Volume 929. p. -
NTNU Untitled
 
7 Meng, Yunpeng; Lin, Boyu; Wang, Lifei; Fan, Jianfeng; Zhang, Shangzhou; Lu, Liwei; Roven, Hans Jørgen; Zhang, Hua.
Effect of Extrusion Combination Types on Microstructure and Mechanical Properties of the AZ31/GW103K Bimetallic Composite Plates. Acta Metallurgica Sinica (English Letters) 2022 ;Volume 35. p. 1959-1972
NTNU Untitled
 
8 Meng, Yunpeng; Zhang, Hua; Lin, Boyu; Wang, Lifei; Fan, Jianfeng; Lu, Liwei; Zhou, Xin; Huang, Hailiang; Zhang, Shanzhou; Roven, Hans Jørgen.
Microstructure and mechanical properties of the AZ31/GW103K bimetal composite rods fabricated by co-extrusion. Materials Science & Engineering: A 2022 ;Volume 833. p. -
NTNU Untitled
 
9 Wu, Shenghua; Søreide, Hanne-Sofie; Chen, Bin; Bian, Jianjun; Yang, Chong; Li, Chunan; Zhang, Peng; Cheng, Pengming; Zhang, Jinyu; Peng, Yong; Liu, gang; Li, Yanjun; Roven, Hans Jørgen; Sun, Jun.
Freezing solute atoms in nanograined aluminum alloys via high-density vacancies. Nature Communications 2022 ;Volume 13.(1) p. -
NTNU Untitled
 
2021
10 Edvardsen, Martine Hanshus.
Optimization of Electrical Conductivity in Screw Extruded Wires: The effect of aluminium oxide particles on screw extruded wires of pure aluminium. Trondheim: NTNU Open 2021 117 p.
SINTEF Untitled
 
11 Kong, Yaping; Jia, Zhihong; Liu, Zhipeng; Liu, Manping; Roven, Hans Jørgen; Liu, Qing.
Effect of Zr and Er on the microstructure, mechanical and electrical properties of Al-0.4Fe alloy. Journal of Alloys and Compounds 2021 ;Volume 857. p. -
NTNU Untitled
 
12 Langelandsvik, Geir; Akselsen, Odd Magne; Furu, Trond; Roven, Hans Jørgen.
Review of aluminum alloy development for wire arc additive manufacturing. Materials 2021 ;Volume 14.(18) p. 1-26
SINTEF NTNU Untitled
 
13 Langelandsvik, Geir; Eriksson, Magnus Carl Fredrik; Akselsen, Odd M.; Roven, Hans Jørgen.
Wire arc additive manufacturing of AA5183 with TiC nanoparticles. The International Journal of Advanced Manufacturing Technology 2021 p. 1-12
SINTEF NTNU Untitled
 
14 Liu, Zhibo; Sun, Jiani; Yan, Zhigang; Lin, Yaojun; Liu, Manping; Roven, Hans Jørgen; Dahle, Arne K..
Enhanced ductility and strength in a cast Al–Mg alloy with high Mg content. Materials Science & Engineering: A 2021 ;Volume 806. p. -
NTNU Untitled
 
15 Paudel, Gagan; Langelandsvik, Geir; Khromov, Sergey; Arbo, Siri Marthe; Westermann, Ida; Roven, Hans Jørgen; Di Sabatino Lundberg, Marisa.
Depth Profiling at a Steel-aluminum Interface Using Slow-flow Direct Current Glow Discharge Mass Spectrometry. Atomic spectroscopy 2021 ;Volume 43.(2) p. 126-133
SRAUFOSS SINTEF NTNU Untitled
 
16 Vallejo-Olivares, Alicia; Philipson, Harald; Gökelma, Mertol; Roven, Hans Jørgen; Furu, Trond; Kvithyld, Anne; Tranell, Gabriella.
Compaction of aluminium foil and its effect on oxidation and recycling yield. The Minerals, Metals & Materials Series 2021 p. 735-741
SINTEF NTNU Untitled
 
17 Wu, Shenghua; Xue, H.; Yang, C.; Kuang, J.; Zhang, P.; Zhang, J. Y.; Li, Yanjun; Roven, Hans Jørgen; Liu, gang; Sun, Jun.
Hierarchical structure in Al-Cu alloys to promote strength/ductility synergy. Scripta Materialia 2021 ;Volume 202.
NTNU Untitled
 
18 Zha, Min; Zhang, Hongmin; Jia, Hailong; Gao, Yipeng; Jin, Shenbao; Sha, Gang; Bjørge, Ruben; Mathiesen, Ragnvald; Roven, Hans Jørgen; Wang, Hui-Yuan; Li, Yanjun.
Prominent role of multi-scale microstructural heterogeneities on superplastic deformation of a high solid solution Al–7Mg alloy. International journal of plasticity 2021 ;Volume 146. p. -
SINTEF NTNU Untitled
 
19 Zha, Min; Zhang, Hong-Min; Meng, Xiang-Tao; Jia, Hailong; Jin, Shen-Bao; Sha, Gang; Wang, Huiyuan; Li, Yanjun; Roven, Hans Jørgen.
Stabilizing a severely deformed Al–7Mg alloy with a multimodal grain structure via Mg solute segregation. Journal of Materials Science & Technology 2021 ;Volume 89. p. 141-149
NTNU Untitled
 
2020
20 Flåm, Jan Eskil.
Wire Arc Additive Manufacturing of an Al-Mg Aluminium Matrix Nanocompsite. Trondheim: NTNU Open 2020 133 p.
SINTEF Untitled
 
21 Kong, Yaping; Pu, Qingqing; Jia, Zhihong; Liu, Manping; Roven, Hans Jørgen; Jia, Jiaqi; Liu, Qing.
Microstructure and property evolution of Al-0.4Fe-0.15Zr-0.25Er alloy processed by high pressure torsion. Journal of Alloys and Compounds 2020 ;Volume 824. p. -
NTNU Untitled
 
22 Langelandsvik, Geir; Furu, Trond; Reiso, Oddvin; Roven, Hans Jørgen.
Effects of iron precipitation and novel metal screw extrusion on electrical conductivity and properties of AA1370 aluminium. Materials Science & Engineering: B. Solid-state Materials for Advanced Technology 2020 ;Volume 254. p. 1-8
NTNU SINTEF Untitled
 
23 Langelandsvik, Geir; Grandcolas, Mathieu; Skorpen, Kristian Grøtta; Furu, Trond; Akselsen, Odd Magne; Roven, Hans Jørgen.
Development of AL-TIC wire feedstock for additive manufacturing by metal screw extrusion. Metals 2020 ;Volume 10.(11) p. 1-17
NTNU SINTEF Untitled
 
24 Langelandsvik, Geir; Horgar, Annbjørg; Furu, Trond; Roven, Hans Jørgen; Akselsen, Odd Magne.
Comparative study of eutectic Al-Si alloys manufactured by WAAM and casting. The International Journal of Advanced Manufacturing Technology 2020 ;Volume 110.(3-4) p. 935-947
SINTEF NTNU Untitled
 
25 Langelandsvik, Geir; Rangvaldsen, Olav; Flåm, Jan Eskil; Akselsen, Odd Magne; Roven, Hans Jørgen.
Wire and Arc Additive Manufacturing with TiC-Nanoparticle Reinforced AA5183 Alloy. MATEC Web of Conferences 2020 ;Volume 326. p. -
NTNU SINTEF Untitled
 
26 Liu, Manping; Chen, Jian; Lin, Yaojun; Xue, Zhoulei; Roven, Hans Jørgen; Skaret, Pål Christian.
Microstructure, mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing. Progress in Natural Science 2020 ;Volume 30.(4) p. 485-493
NTNU Untitled
 
27 Paudel, Gagan; Khromov, Sergey; Kasik, Martin; Roven, Hans Jørgen; Di Sabatino Lundberg, Marisa.
Influence of polycrystalline material on crater shape optimization and roughness using low power/low-pressure direct-current glow discharge mass spectrometry. Journal of Analytical Atomic Spectrometry 2020 ;Volume 35.(7) p. 1450-1457
NTNU Untitled
 
28 Peron, Mirco; Skaret, Pål Christian; Fabrizi, Alberto; Varone, Alessandra; Montanari, Roberto; Roven, Hans Jørgen; Ferro, Paolo; Berto, Filippo; Torgersen, Jan.
The effect of Equal Channel Angular Pressing on the stress corrosion cracking susceptibility of AZ31 alloy in simulated body fluid. Journal of The Mechanical Behavior of Biomedical Materials 2020 ;Volume 106. p. -
NTNU Untitled
 
29 Skorpen, Kristian Grøtta; Roven, Hans Jørgen; Reiso, Oddvin.
A physical based empirical model for the accumulated strain in novel Metal Continuous Screw Extrusion (MCSE). Journal of Materials Processing Technology 2020 ;Volume 282. p. -
NTNU Untitled
 
30 Skorpen, Kristian Grøtta; Roven, Hans Jørgen; Reiso, Oddvin.
Corrigendum to “A physical based empirical model for the accumulated strain in novel Metal Continuous Screw Extrusion (MCSE)” [J. Mater. Process. Technol. 282C (2020) 116670] (Journal of Materials Processing Tech. (2020) 282, (S0924013620300844), (10.1016/j.jmatprotec.2020.116670)). Journal of Materials Processing Technology 2020 ;Volume 285. p. -
NTNU Untitled
 
31 Wijayanti, Ika Dewi; Denys, Roman Volodymyrovich; Suwarno, Suwarno; Volodin, Alexei A.; Lototskyy, Mykhaylo V.; Guzik, Matylda N.; Nei, Jean; Young, Kwo; Roven, Hans Jørgen; Yartys, Volodymyr.
Hydrides of Laves type Ti–Zr alloys with enhanced H storage capacity as advanced metal hydride battery anodes. Journal of Alloys and Compounds 2020 ;Volume 828. p. -
UiO NTNU IFE Untitled
 
32 Zhang, Hua; Ren, Shuai; Li, Xia; Wang, Lifei; Fan, Jianfeng; Chen, Shuying; Zhu, Lilong; Meng, Fanchao; Tong, Yang; Roven, Hans Jørgen; Zhang, Shangzhou; Jiang, Liang.
Dramatically enhanced stamping formability of Mg–3Al–1Zn alloy by weakening (0001) basal texture. Journal of Materials Research and Technology (JMR&T) 2020 ;Volume 9.(6) p. 14742-14753
NTNU Untitled
 
33 Zhang, Wenyan; Zhang, Hua; Wang, Lifei; Fan, Jianfeng; Li, Xia; Zhu, Lilong; Chen, Shuying; Roven, Hans Jørgen; Zhang, Shangzhou.
Microstructure Evolution and Mechanical Properties of AZ31 Magnesium Alloy Sheets Prepared by Low-Speed Extrusion with Different Temperature. Crystals 2020 ;Volume 10.(8) p. 1-9
NTNU Untitled
 
34 Zhou, Bijin; Wang, Leyun; Jin, Peipeng; Jia, Hailong; Roven, Hans Jørgen; Zeng, Xiaoqin; Li, Yanjun.
Revealing slip-induced extension twinning behaviors dominated by micro deformation in a magnesium alloy. International journal of plasticity 2020 ;Volume 128. p. -
NTNU Untitled
 
2019
35 Kulmo, Wenche Margrethe; Roven, Hans Jørgen; Justnes, Harald.
En vill ide har blitt til miljøvennlig betong. Gemino.no (Gemini) [Business/trade/industry journal] 2019-03-21
NTNU Untitled
 
36 Liu, Yang; Liu, Manping; Chen, Xuefei; Cao, Yang; Roven, Hans Jørgen; Maxim, Murashkin; Valiev, Ruslan Z.; Zhou, Hao.
Effect of Mg on microstructure and mechanical properties of Al-Mg alloys produced by high pressure torsion. Scripta Materialia 2019 ;Volume 159. p. 137-141
NTNU Untitled
 
37 Ragnvaldsen, Olav.
Characterisation of an aluminium matrix nanocomposite wire manufactured by screw extrusion. Trondheim: NTNU Open 2019 179 p.
SINTEF Untitled
 
38 Roven, Hans Jørgen.
Materials Science and Engineering - Short status and Challenges. NTNU China Forum; 2019-03-12 - 2019-03-12
NTNU Untitled
 
2018
39 Amundsen, Hans Sigurd; Furu, Trond; Reiso, Oddvin; Roven, Hans Jørgen.
The applicability of aluminium as reinforcement material in red mud concrete. Nasjonal konferanse for materialteknologi; 2018-05-30 - 2018-05-31
NTNU Untitled
 
40 Kalager, Harald; Skorpen, Kristian Grøtta; Simensen, Christian Julius; Ma, Xiang; Østhus, Rune; Roven, Hans Jørgen.
Co-extruded Al4.5Mg and rapidly solidified Al4.5Mg1Ag - structure and properties. The 16th International Conference on Aluminum Alloys - ICAA16; 2018-06-17 - 2018-06-21
NTNU SINTEF SRAUFOSS Untitled
 
41 Kalager, Harald; Skorpen, Kristian Grøtta; Simensen, Christian Julius; Ma, Xiang; Østhus, Rune; Roven, Hans Jørgen.
Co-extruded Al4.5Mg and rapidly solidified Al4.5Mg1Ag - structure and properties. I: ICAA16 : Proceedings of the 16th International Aluminum Alloys Conference 2018. Canadian Institute of Mining, Metallurgy and Petroleum 2018 ISBN 978-1-926872-41-4. p. -
NTNU SINTEF SRAUFOSS Untitled
 
42 Langelandsvik, Geir; Akselsen, Odd Magne; Eriksson, Magnus; Furu, Trond; Roven, Hans Jørgen.
Comparison of wire- and powder fed AM for Al-Si alloys. Nasjonal konferanse for materialteknologi; 2018-05-30 - 2018-05-31
NTNU SINTEF Untitled
 
43 Langelandsvik, Geir; Skorpen, Kristian Grøtta; Reiso, Oddvin; Furu, Trond; Roven, Hans Jørgen.
Electrical conductivity and strength in aluminium AA1370 wires produced by novel screw extrusion (MCSE). The 16th International Concerence on Aluminum Alloys - ICAA16; 2018-06-17 - 2018-06-21
NTNU Untitled
 
44 Ma, Xiang; Simensen, Christian Julius; Østhus, Rune; Roven, Hans Jørgen.
Improvement of Hardness and Corrosion Resistance by Rapid Solidification of AlMgAg Alloys with co-extrusion. The 16th International conference on aluminium alloys - ICAA16; 2018-06-17 - 2018-06-21
NTNU SINTEF SRAUFOSS Untitled
 
45 Mølmen, Live; Yartis, Volodymyr; Svensson, Ann Mari; Roven, Hans Jørgen.
Melt spinning of a TiZr-alloy for NiMH battery anodes. Nasjonal konferanse for materialteknologi; 2018-05-30 - 2018-05-31
NTNU Untitled
 
46 Oksholen, Tore; Roven, Hans Jørgen.
Minister og UH-ledere til Kina for åpne dører. [Newspaper] 2018-01-31
NTNU Untitled
 
47 Saleh, Mohamed Ismail; Roven, Hans Jørgen; Khan, Tahir I.; Iveland, Terje.
Transient liquid phase bonding of Al-6063 to steel alloy UNS S32304. Journal of Manufacturing and Materials Processing (JMMP) 2018 ;Volume 2.(3) p. -
NTNU Untitled
 
48 Wiik, Linda; Justnes, Harald; Roven, Hans Jørgen; Rønning, Terje F.; Haha, Mohsen Ben; Rosenkilde, Christian; Furu, Trond.
Development of Low-Carbon, High-Durability Concrete Using Bauxite Residue and Aluminium. I: Travaux 47, Proceedings of the 36th International ICSOBA Conference, Belem, Brazil, 29 October - 1 November, 2018. : ICSOBA 2018 ISBN 0-000-00001-9. p. 429-441
NTNU SINTEF Untitled
 
49 Yu, Yingda; Liu, Manping; Hjelen, Jarle; Roven, Hans Jørgen.
EBSD characterization of incoherent CSL grain boundaries in pure aluminium processed by severe plastic deformation. The 19th International Microscopy Congress - IMC19; 2018-09-09 - 2018-09-14
NTNU Untitled
 
50 Zha, Min; Yu, Zhi-Yuan; Qian, Feng; Wang, Huiyuan; Li, Yanjun; Mathiesen, Ragnvald; Roven, Hans Jørgen.
Achieving dispersed fine soft Bi particles and grain refinement in a hypermonotectic Al–Bi alloy by severe plastic deformation and annealing. Scripta Materialia 2018 ;Volume 155. p. 124-128
NTNU Untitled
 
    Show next list